150mm and Flat base
Part No: H514/DC40-S dutch head
This special accessory has been conceived to add a 3rd axis to a standard Fluid Head and allow the lateral movement called "Dutch angle", enhancing special effects.51 420 SEK ORDER
Part No: H513/150C20-S head 150mm bowl
extremely stable support for standard EFP configurations
Part No: H541Master Mk2 Fluid Head Flat Base
For cameras weighing from 3 to 30 kg (6.6 to 66 lbs).56 490 SEK ORDER
Part No: H570/FMaxima head flat base
For cameras weighing from 0 to 40 kg (0 to 88 lbs).79 185 SEK ORDER
Part No: K2.43670.0ARRIHEAD 2
The ARRIHEAD 2 is a compact geared head designed for current film and digital cameras, with a tilt axis centered on the camera's optical center.
Part No: H562Lambda twin 3D flat base
Part No: H522Sigma head flat base
For cameras weighing from 10 Kg (22 lbs) to 40 Kg (88 lbs)58 255 SEK ORDER
Part No: RF.53001Atlas 30 Balanced fluid head
The “Atlas 30″ is a completely new design head, with a patented counterbalance system. Capable of taking camera‘s up to 30 Kgs (66 lbs) @ 25 cm (10“) above the heads pivotal centre. Operated by a single control knob, from 0 – 100 %.
Part No: RF.50001Atlas Balanced fluid head
The “Atlas” is a completely new design head,with a patented counterbalance system. Capable of taking camera‘s up to 50 Kgs (110 lbs) @ 30 cm (12“) above the heads pivotal centre. Operated by a single control knob, from 0 – 100 %.
Part No: RF.200412004 Balanced Fluid Head
Incorporates the will proven Ronford-Baker fluid system operated by a single fluid system control lever with four progressive positions both pan and tilt.52 780 SEK ORDER
Part No: RF.53040Atlas 40 Balanced fluid head
Excellent Fluid head for ALEXA, RED Epics, and Sony F55
Part No: H520Lambda head flat base
Part No: RF.71000Atlas 7 Fluid head. Kit
The Ronford-Baker Atlas 7 is a completely new patented design fluid head. Incorporating a strong, rigid design with minimum platform flex, together with the well proven Ronford-Baker fluid system.
Part No: RF.710013rd Axis / Rollover fluid unit
The Nodal Point can be found by attaching the camera without the lens by using a pointer in its place. Counterbalance weights can be fitted on both 3rd Axis and Tilt, at the top and bottom of the adjuster plates62 270 SEK ORDER
Part No: H580Cartoni Magnum
Designed to support fully decked Studio and OB cameras equipped with long boxed lenses,
Part No: H562/SLambda twin 3D flat base