Part No: MAG-RISER EXT-TEL SM
Mag Baby Extension 6'' to 8 1/2'' (Telescopic)
The Magliner Baby Extension is a great way to increase clearance from the cart when it is being used. It is also a smart way increase the number of accessories that can fit on the pin without "bother" any other attachments.

Part No: MAG-FB A
Mag Front Box Mount Adapter
The Magliner front box adaåter allows you to mount the front box anywhere around any shelf with a ridge. So If you don’t have a Mitchel or Dove Tail Mount, you can use this accessory to hold your Front Box. It hangs from the edge of your Top Shelf and can be set up anywhere around the Shelf

Part No: MAG-TP
Mag Tripod Holder w/ Universal 5/8'' Pin
The Mag Tripod Holder can hold two full size Tripods, a rubber bungee secures Tripods in place.

Part No: MAG-LTA
Mag Swing Arm
The Magliner Swing Arm is a durable pivoting arm with a female 5/8 spigot as a base and a male 5/8 spigot on the out reach of the arm. Its design is compact, yet robust and sturdy.

Part No: MAG-RISER EXT-TEL MD
Mag Baby Extension 8'' to 12'' (Telescopic)
The Magliner Baby Extension is a great way to increase clearance from the cart when it is being used. It is also a smart way increase the number of accessories that can fit on the pin without "bother" any other attachments.

Part No: MAG-H MINI
Mag Mini Rear Loading Handle
The Magliner Mini Rear Loading Handle is an easy way to get those rear wheels off the ground. The ergonomic and compact design does not alot of extra clearance space behind the unit and it is very useful for fast load/unload scenarios.

Part No: MAG-LTA SM
Mag Swing Arm (Small)
The Magliner Swing Arm is a durable pivoting arm with a female 5/8 spigot as a base and a male 5/8 spigot on the out reach of the arm. Its design is compact, yet robust and sturdy.

Part No: MAG-RISER EXT-TEL LG
Mag Baby Extension 12'' to 20'' (Telescopic)
The Magliner Baby Extension is a great way to increase clearance from the cart when it is being used. It is also a smart way increase the number of accessories that can fit on the pin without "bother" any other attachments.

Part No: MAG-HN
Mag Nose Loading Handle
The Magliner Nose Loading Handle is an excellent accessory to have around when you need someone to help you lift and carry your Magliner.

Part No: MAG-NP CTR
Mag Nose 5/8'' Baby Pin (Center)
The Magliner Nose 5/8” Baby Pin (Center) designed to handle more than one accessory at a time. All aluminum construction in anodized black.

Part No: MAG-S
Mag U-Handle 5/8'' Baby Pin
The Magliner U-Handle 5/8 Baby Pin has been used to accommodate a number of Mag accessories. The pin is made of one inch solid steel bar machined to have a tight fit around the Magliner “U” Handle Bar. It is secured by a special notch support spacer which locks in place with a grade 8 bolt.

Part No: MAG-HUP
Mag 'U' Handle 5/8'' Offset Baby Pin
The Magliner U-Handle Offset Baby Pin (Offset) was designed to to work together with the Mag Lap Top Tray and the Mag Lap Top Tray Swing Arm.

Part No: MAG-NP DUAL
Mag Nose 5/8'' Baby Pin (Dual)
The Magliner Nose 5/8” Baby Pin (Dual) same as MAG-NP OS and MAG-NP CTR but designed to handle more than one accessory at a time.All aluminum construction in anodized black.

Part No: MAG-SH MINI
Mag Mini Horizontal Cross Bar 30 3/16''
The Magliner Horizontal Cross Bar, the unit anchors to two 5/8” Baby Pins at each end of the cart (MAG-NP CTR and MAG-S). You can use as many “Snap-On” 5/8” Baby Pins (TR-04 SHP) to run along the length of the bar allowing you to install up to three (3) 17” Monitors side by side.

Part No: MAG-HS
Mag Steadi-Cam ''Swing'' Handle (Pair)
The Magliner Steadi-Cam “Swing” Handle was created to allow the operator to dock the Steadi-Cam gear on the Magliner without having to remove the monitor or the batteries from the unit

Part No: MAG-NP OS
Mag Nose 5/8'' Baby Pin (Offset)
The Magliner Nose 5/8” Baby Pin (Offset) was designed to work with the Mag Sound Tray. All aluminum construction in anodized black.

Part No: MAG-SH SR
Mag Senior Horizontal Cross Bar 51''
The Magliner Senior Horizontal Cross Bar, Unit anchors to two 5/8” Baby Pins at each end of the cart (MAG-NP CTR and MAG-S). You can use as many “Snap-On” 5/8” Baby Pins (TR-04 SHP) to run along the length of the bar allowing you to install up to three (3) 17” Monitors side by side.

Part No: MAG-LCD HD-MA BK-X
Mag LCD HD 21-36 lbs. Monitor Arm (Black)
The Magliner LCD Arms (HD, MD & LD) accommodate big LCD monitors and flat panel displays. You’ll never twist a knob or push a lever. Simply float your plasma or LCD monitor with fingertip ease from one position to another.

Part No: MAG-NP SD
Mag Nose 5/8'' Baby Pin (Side)
The Magliner Nose “Snap-On” 5/8” Baby Pin (Side) was designed to handle those accessories that need to be at a lower level, such as the Mag Lap Top Tray. Unit can be positioned anywhere along either side of the Mag Nose.

Part No: MAG-SH JR
Mag Junior Horizontal Cross Bar 38 1/4''
Unit anchors to two 5/8” Baby Pins at each end of the cart (MAG-NP CTR and MAG-S). You can use as many “Snap-On” 5/8” Baby Pins (TR-04 SHP) to run along the length of the bar allowing you to install up to three (3) 17” Monitors side by side.

Part No: MAG-LCD MD-MA BK-X
Mag LCD Medium Duty 8-24 lbs. Monitor Arm (Black)
The Magliner LCD Arms (HD, MD & LD) accommodate big LCD monitors and flat panel displays. You’ll never twist a knob or push a lever

Part No: MAG-R2 LK-X
Mag Mike Boom Grip & Base with Locking System (Small)
The Magliner Mic Boom Grip allows you to anchor your Mic Boom securely, preventing it from being dropped accidentally.

Part No: MAG-A RX
Mag Antenna Riser
The Magliner Antenna Riser is a telescopic riser for audio antennae.

Part No: MAG-U A-R
Mag Umbrella Canvas (Red)
The Magliner Umbrella Canvas are made from tested and approved textiles custom designed and fabricated for the conditions for a production shoot. The Canvas needs to placed on part number MAG-U.

Part No: MAG-LCD LD-MA BK-X
Mag LCD Light Duty 9-21 lbs. Monitor Arm (Black)
The Magliner LCD Arms (HD, MD & LD) accommodate big LCD monitors and flat panel displays. You’ll never twist a knob or push a lever.

Part No: MAG-R2
Mag Mike Boom Grip & Base (Small)
The Magliner Mike Boom Grip & Base consist for two part which sit on the rim of the top and bottom shelf for your Magliner Junior or Senior.

Part No: MAG-CA SL KIT
Mag Safety Pin and Prong Kit (Holds Magliner Top S
THe Magliner Top Shelf Safety Lock and Prong secures Top Shelf from tilting sideways, specially useful when using Mag Sound Tray or Monitor Arms attached to Top Shelf.

Part No: MAG-U A-BK
Mag Umbrella Canvas (Black)
The Magliner Umbrella Canvas are made from tested and approved textiles custom designed and fabricated for the conditions for a production shoot. The Canvas needs to placed on part number MAG-U.

Part No: MAG-LCD HD-MA HU
Mag LCD HD Monitor Arm U-Handle Adapter
The Magliner Mag LCD U-Handle Mount has a special receiver to anchor any of our new LCD Monitor Arms. It’s held on by a high grade 1/2” diameter bolt that fits into any Modified Magliner Cart with a pre-drilled U-Handle.

Part No: MAG-R4 LK-X
Mag Mike Boom Grip & Base with Locking System (Large)
The Magliner Mic Boom Grip allows you to anchor your Mic Boom securely, preventing it from being dropped accidentally.

Part No: MAG-CB LK
Mag Cross Bar with Lock (Holds Middle Shelf locked
The Mag U-Handle Cross Bar with Lock must be installed when using a Middle Shelf on any modified Magliner.

Part No: MAG-V
Mag Dual Video Monitor Bracket
The Magliner Dual Video Monitor Mount is a T-bar, it has one female 5/8" socket and two male 5/8" spigots on either side.

Part No: MAG-LCD HD-MA N
Mag LCD HD Monitor Arm Nose Adapter
The Magliner Mag LCD Nose Adapter bolts right into any of our pre-drilled Mag HD Noses, it uses the same standard bolt pattern. The special alumi- num plate will allow you to dock any of our LCD Monitor Arms.

Part No: MAG-R4
Mag Mike Boom Grip & Base (Large)
The Magliner Mike Boom Grip & Base consist for two part which sit on the rim of the top and bottom shelf for your Magliner Junior or Senior.

Part No: MAG-CB LK AL
Mag Detachable Cross Bar with Lock (Holds Middle S
The Magliner Detachable Cross bar has the same function as the standard Mag U-Handle Cross Bar with Lock, but with the ability to detach your Mag Cross Bar from the U-Handle without having to disassemble your cart.

Part No: MAG-VT
Mag Dual Video Monitor Bracket (Telescopic)
The Magliner Dual Video Monitor Bracket is the same as the Mag Video Dual Bracket in size, but able to adjust the width depending on the size of the monitors you are using.

Part No: MAG-LCD DMR
Mag LCD Arm Desk Mount Column Receiver
The Maglliner Mag LCD Monitor Arm Nose Adapter with Monitor Arm Thru Desk Mount receiver.
