These sites use cookies. By continuing to browse the site you are agreeing to our use of cookies.
HIDE OK

Your cart

(0)

Battery Plates

11-0769 BIT-769 Bolt Sidekick Dual AB Mount Batt plate 14.4V
Part No: 11-0769
BIT-769 Bolt Sidekick Dual AB Mount Batt plate 14.4V
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on both sides.
5 115 SEK ORDER
11-0790 BIT-790 Bolt RX Dual AB Mount Battery Plate 14.4V
Part No: 11-0790
BIT-790 Bolt RX Dual AB Mount Battery Plate 14.4V
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on both sides.
5 115 SEK ORDER
11-0798 BIT-798 Bond Dual V-Mount Batt plate 14.4V
Part No: 11-0798
BIT-798 Bond Dual V-Mount Batt plate 14.4V
Securely fasten your Bond and Cube between Battery Plates
5 115 SEK ORDER
11-0768 BIT-768 Bolt Sidekick Dual V Mount Batt plate 14.4
Part No: 11-0768
BIT-768 Bolt Sidekick Dual V Mount Batt plate 14.4
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on both sides.
5 115 SEK ORDER
11-0797 BIT-797 Bond Dual Gold-Mount Batt plate 14.4V
Part No: 11-0797
BIT-797 Bond Dual Gold-Mount Batt plate 14.4V
Securely fasten your Bond and Cube between Battery Plates
5 115 SEK ORDER
11-0761 Dual Anton Bauer Mount Battery Plate for Bolt TX
Part No: 11-0761
Dual Anton Bauer Mount Battery Plate for Bolt TX
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on both sides.
5 115 SEK ORDER
11-0760 BIT-760 Dual V Mount Battery Plate for BOLT TX
Part No: 11-0760
BIT-760 Dual V Mount Battery Plate for BOLT TX
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on both sides.
5 115 SEK ORDER
11-0791 BIT-791 Bolt RX Dual V Mount Battery Plate 14.4V
Part No: 11-0791
BIT-791 Bolt RX Dual V Mount Battery Plate 14.4V
This Dual Battery Plate from Teradek allows you to sandwich Bolt Transmitters or Receivers between your camera/monitor and battery using Gold (AB) Mount or V-Mount on both sides.
5 115 SEK ORDER
11-0793 BIT-793 Bolt RX Single Female V-Mount Batt plate
Part No: 11-0793
BIT-793 Bolt RX Single Female V-Mount Batt plate
This Single (Female) Battery Plate from Teradek allows you to secure a Teradek Bolt Receiver to either an Anton Bauer Gold Mount battery plate.
3 410 SEK ORDER
11-0786 BIT-786 Cube 6XX/7XX/8XX and Serv Pro Dual Gold Mount
Part No: 11-0786
BIT-786 Cube 6XX/7XX/8XX and Serv Pro Dual Gold Mount
Allows for Teradek Cube 605/655 camera-back mounting configuration
4 590 SEK ORDER
11-0787 BIT-787 Cube 6XX/7XX/8XX and Serv Pro Dual V Mount
Part No: 11-0787
BIT-787 Cube 6XX/7XX/8XX and Serv Pro Dual V Mount
Allows for Teradek Cube 605/655 camera-back mounting configuration
4 590 SEK ORDER
11-0792 BIT-792 Bolt RX Single Female AB Mount Batt plate
Part No: 11-0792
BIT-792 Bolt RX Single Female AB Mount Batt plate
This Single (Female) Battery Plate from Teradek allows you to secure a Teradek Bolt Receiver to either an Anton Bauer Gold Mount battery plate.
3 410 SEK ORDER
11-0764 BIT-764 Single V Mount Battery Plate for BOLT TX
Part No: 11-0764
BIT-764 Single V Mount Battery Plate for BOLT TX
This Single (Female) Battery Plate from Teradek allows you to power your Bolt Transmitter using either Gold (AB) Mount or V-Mount battery plate.
3 805 SEK ORDER
11-0765 Single Anton Bauer Mount Battery Plate for Bolt TX
Part No: 11-0765
Single Anton Bauer Mount Battery Plate for Bolt TX
This Single (Female) Battery Plate from Teradek allows you to power your Bolt Transmitter using either Gold (AB) Mount or V-Mount battery plate.
3 805 SEK ORDER
TER-BIT600 Canon BP-970G 7.2v Batt to 2-pin Lemo Battery Plate Adapter
Part No: 11-0654
Canon BP-970G 7.2v Batt to 2-pin Lemo Battery Plate Adapter
Battery adapter plate for Canon BP-945/970G 7.2 volt batteries to 2-Pin Power
1 310 SEK ORDER
11-0759 Bolt TX/RX Batt Plate for Canon LP-E6 / Sony NP-F550
Part No: 11-0759
Bolt TX/RX Batt Plate for Canon LP-E6 / Sony NP-F550
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
1 970 SEK ORDER
11-0810 Bolt LT/XT Batt Plate for Sony L/Canon LP-E6
Part No: 11-0810
Bolt LT/XT Batt Plate for Sony L/Canon LP-E6
This Battery Plate mounts directly onto any Bolt Transmitter and MOST Receivers.
1 310 SEK ORDER
11-0758 BIT-758 Sony B Series Battery Plate for BOLT TX/RX
Part No: TER-BIT758
BIT-758 Sony B Series Battery Plate for BOLT TX/RX
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
1 570 SEK ORDER
11-0755 BIT-755 Panasonic VW-VBG6 Battery Plate for BOLT TX/RX
Part No: 11-0755
BIT-755 Panasonic VW-VBG6 Battery Plate for BOLT TX/RX
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
2 035 SEK ORDER
11-0752 BIT-752 Canon BP-970 Battery Plate for BOLT TX/RX
Part No: 11-0752
BIT-752 Canon BP-970 Battery Plate for BOLT TX/RX
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
1 970 SEK ORDER
TER-BIT625 Panasonic VW-VBG6 7.2v Batt to 2-pin Lemo Battery Adapter Plate
Part No: 11-0626
Panasonic VW-VBG6 7.2v Batt to 2-pin Lemo Battery Adapter Plate
NIBL 625 Battery adapter plate for Panasonic VW-VBG6 & CGA-E/625 7.2V to Barrel Connector
1 490 SEK ORDER
11-0754 BIT-754 Panasonic CGA-D54 Battery Plate for BOLT TX/RX
Part No: 11-0754
BIT-754 Panasonic CGA-D54 Battery Plate for BOLT TX/RX
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
1 970 SEK ORDER
11-0759 BIT-750 Canon LP-E6 Battery Plate for BOLT TX/RX
Part No: 11-0750
BIT-750 Canon LP-E6 Battery Plate for BOLT TX/RX
For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.
1 570 SEK ORDER
11-0237 BIT-236 2-pin Lemo to Flying Lead Cable (90cm)
Part No: 11-0237
BIT-236 2-pin Lemo to Flying Lead Cable (90cm)
2-pin Lemo to Flying Lead Cable
1 130 SEK ORDER
TER-BIT708 BIT-708 2pin Lemo to 2pin Lemo (Approx 20cm) Cable
Part No: 11-0708
BIT-708 2pin Lemo to 2pin Lemo (Approx 20cm) Cable
This power cable can be used to power transmitter or receiver from any 2-pin Connector power source.
1 190 SEK ORDER
11-0718 45cm Lemo to 2pin Lemo (Alexa) Cable
Part No: 11-0718
BIT-718 45cm Lemo to 2pin Lemo (Alexa) Cable
CUBIT 718 - 4-Pin Connector to 2-Pin Connector (Alexa) 18" Cable
1 190 SEK ORDER
11-0706 BIT-706 2pin Lemo to 4pin Lemo (Approx 20cm) Cable
Part No: 11-0706
BIT-706 2pin Lemo to 4pin Lemo (Approx 20cm) Cable
BIT 706 2-Pin Connector to 4Pin Connector, 6in Cable
1 190 SEK ORDER
11-0219 BIT-218 2-pin Lemo to Flying Lead Cable (45cm)
Part No: 11-0219
BIT-218 2-pin Lemo to Flying Lead Cable (45cm)
2-pin Lemo to Flying Lead Cable (45cm)
895 SEK ORDER
Sign in

Your cart

(0)