Steadycam Accessories
Part No: 918TS0248
Yoke for RainbowHD - multi rods adapter Ø15mm/56mm
Attaches to the center of gravity of the monitor.
To mount on 15mm rods with 56mm spacing, or on 5/8" rods (16mm) with 3" or 3.5" spacing (76 or 89mm)

Part No: 918TS0239
Yoke for RainbowHD - for rods Ø16mm/89mm
Attaches to the center of gravity of the monitor.
Compatible with most existing equipment.

Part No: 918TS0240
Yoke for RainbowHD - for rods MK-V Ø19mm/84mm
Attaches to the center of gravity of the monitor.
Uses constant torque rotating system.

Part No: 918TS0242
Artemis Kit II for RainbowHD (yoke)
Artemis kit II includes:
1x 918TS0221 Bridge Artemis
1x 918TS0239 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0243
Betz Kit II for RainbowHD (yoke)
Betz kit II includes:
1x 918TS0206 Bridge Betz
1x 918TS0239 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0244
Master Kit II for RainbowHD (yoke)
Master kit II includes:
1x 918TS0222 Bridge Master
1x 918TS0239 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0234
Yoke for CineMonitorHD6 - for rods MK-V Ø19mm/84mm
Attaches to the center of gravity of the monitor.
Uses constant torque rotating system.

Part No: 918TS0203A
Yoke for CineMonitorHD6 - for rods Ø16mm/89mm
The monitor is held to the yoke on its center of gravity.
A coin is enough to tighten up the monitor.

Part No: 918TS0203
Yoke for CineMonitorHD6 - for rods Ø16mm/89mm
Attaches to the center of gravity of the monitor.
Compatible with most existing equipment.

Part No: 918TS0249
Yoke for CineMonitorHD6 - multi rods adapter Ø15mm
Attaches to the center of gravity of the monitor.
To mount on 15mm rods with 56mm spacing, or on 5/8" rods (16mm) with 3" or 3.5" spacing (76 or 89mm)

Part No: 918TS0227
Artemis Kit II for CineMonitorHD 6'' (yoke)
Artemis kit II includes:
1x 918TS0221 Bridge Artemis
1x 918TS0203 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0224
Betz Kit II for CineMonitorHD 6'' (yoke)
Betz kit II includes:
1x 918TS0206 Bridge Betz
1x 918TS0203 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0229
Master Kit II for CineMonitorHD 6'' (yoke)
Master kit II includes:
1x 918TS0222 Bridge Master
1x 918TS0203 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0235
Yoke for CineMonitorHD8 - for rods MK-V Ø19mm/84mm
Attaches to the center of gravity of the monitor.
Uses constant torque rotating system.

Part No: 918TS0204A
Yoke for CineMonitorHD8 - for rods Ø16mm/89mm
The monitor is held to the yoke on its center of gravity.
A coin is enough to tighten up the monitor.

Part No: 918TS0204
Yoke for CineMonitorHD8 - for rods Ø16mm/89mm
Attaches to the center of gravity of the monitor.
Compatible with most existing equipment.

Part No: 918TS0250
Yoke for CineMonitorHD8 - multi rods adapter Ø15mm
Attaches to the center of gravity of the monitor.
To mount on 15mm rods with 56mm spacing, or on 5/8" rods (16mm) with 3" or 3.5" spacing (76 or 89mm)

Part No: 918TS0225
Betz Kit II for CineMonitorHD 8'' (yoke)
Betz kit II includes:
1x 918TS0206 Bridge Betz
1x 918TS0204 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0230
Master Kit II for CineMonitorHD 8'' (yoke)
Master kit II includes:
1x 918TS0222 Bridge Master
1x 918TS0204 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0228
Artemis Kit II for CineMonitorHD 8'' (yoke)
Artemis kit II includes:
1x 918TS0221 Bridge Artemis
1x 918TS0204 Yoke with bridge 89-16
1x 918TS0223 Pair of 16mm rods

Part No: 918TS0221
Bridge Artemis - for rods Ø16mm/89mm
To mount 16mm rods with a spacement of 89mm on Artemis™ systems.

Part No: 918TS0206
Bridge Betz - for rods Ø16mm/89mm
To mount 16mm rods with a spacement of 89mm on Betz™ systems.

Part No: 918TS0222
Bridge Master - for rods Ø16mm/89mm
To mount 16mm rods with a spacement of 89mm on Steadicam Master™ series.
