Arri - ALEXA
Part No: K0.0007029
ALEXA SXT Plus Basic Camera Set
in-camera recording of ProRes 4K UHD (3840x2160 pixels) and ProRes 4K Cine (4096x2636 pixels).

Part No: K2.72022.0
ACG-2 Adjustable Center Grip Tall
The ARRI ACG-2 attaches to the Side Camera Handle (SCH-1) instead of the Adjustable Center Grip Medium (ACG-1).

Part No: K0.71320.0
EVF Set for Alexa M/XT M
The EVF-Set is all you need to use the ALEXA Electronic Viewfinder EVF-1 on the ALEXA M or ALEXA XT M.

Part No: K2.73003.0
ACP-2 Alexa M Cage Plate
The ARRI ACP-2 is a counterpart to ALEXA M Bridge Plate Adapter 2 (AMB-2).

Part No: K2.72012.0
Viewfinder Cable Short KC 150-S
The KC-150-S connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras.

Part No: K2.72092.0
Ground Glass 4:3 Blank 1200
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 4:3 mode with no markings. 1200 grit surface.

Part No: K5.72132.0
ALEXA Display cover
The ALEXA display cover is the plastic cover which fits over the electronic display on the camera body.

Part No: K2.0006140
MVB-1 Viewfinder Mounting Bracket
The ARRI MVB-1 Viewfinder Mounting Bracket for the ALEXA MINI LF/ ALEXA MINI attaches the MVF-1/MVF-2 viewfinder to the ALEXA MINI LF/ALEXA MINI via 15mm LWS rods and viewfinder mount.

Part No: K2.0006960
Transvideo StarliteHD-ARRI 5'' monitor
The Transvideo Starlite HD5-ARRI is an 5" OLED Monitor with the ARRI bus interface this will enable camera control via the touch interface.

Part No: K2.72011.0
Battery Adapter Top V-Lock BAT-V
The ARRI BAT-V attaches to the top of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body or ALEXA XT Plus and accepts V-lock on-board batteries. Batteries can be hot-swapped.

Part No: K2.72138.0
Precision IRND Filter Set (Completion)
The completion filter set includes FSND 0.3, 0.9, 1.5, 2.1 and 2.4 filters.

Part No: K2.72038.0
ALEXA EXT Distribution Box (EDB-1)
The ARRI EDB-1 is a box that provides three more EXT sockets for the simultaneous use of 3D Sync and UMC-3.

Part No: K0.0007028
ALEXA SXT EV Basic Camera Set
in-camera recording of ProRes 4K UHD (3840 x 2160 pixels) and ProRes 4K Cine (4096 x 2636 pixels).

Part No: K2.72015.0
HEB-2 Handle Extension Block
The ARRI HEB-2 attaches to the Center Camera Handle (CCH-1) or any 3/8"-16 UNC threaded mounting point.

Part No: K2.72139.0
Precision IRND Filter Set (Full)
The FSND filter set full is a filter set includes the IFM Optical Clear, FSND filters 0.3, 0.6, 0.9, 1.2, 1.5, 1.8, 2.1 and 2.4, the IFM Shim, the filter insertion tool (the Ground Glass/Frameglow tool K4.52722.0), the IFM/Extenders Depth Gauge DG-1 and a case with space for all that stuff.

Part No: K2.72081.0
SMPTE Steadicam Cable for Alexa M 5m
The ARRI SMPTE Steadycam Cable for the ALEXA M is an extremely thin and flexible hybrid fiber/copper (signal and power) cable that connects ALEXA M or ALEXA XT M head and body for steadicam use.

Part No: K2.0006334
MAP-1 Lightweight Adapter Plate
The ARRI MAP-1 Lightweight Adapter plate for the ALEXA MINI is a small compact and lighyweight adapter plate for easy setup on gimbals and mini rigs

Part No: K2.72013.0
Viewfinder Cable Medium KC 151-S
The KC 151-S connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras.

Part No: K2.72096.0
Ground Glass 16:9 Blank 800
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 16:9 mode with no markings. 800 grit surface.

Part No: K4.74112.0
Alexa XT Spare Fan Module SFM-2
Spare fan for the Alexa XT models.

Part No: K2.0008135
ALEXA MINI Viewfinder Cable 75cm
Connects the ALEXA MINI Viewfinder MVF-1 to the Veiwfinder socket on the camera (spare part).

Part No: K2.72003.0
Battery Adapter Back Gold Mount BAB-G
The ARRI BAB-G attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus or ALEXA XT Studio and accepts Gold mount on-board batteries. Batteries can be hot-swapped.

Part No: K4.73062.0
IFM Optical Clear
The ARRI IFM Optical clear is an IFM filter frame with an optical clear, to be used when no ND attenuation is desired (shim must be present).

Part No: K2.48825.0
ENG Adapter Canon (cmotion)
The ARRI ENG adapter Canon (cmotion) cable connects the ARRI lens control system with Canon servo demands for remote focus and zoom control.

Part No: KB.71510.D
ALEXA Classic EV Pro Camera Set
A 35 format film-style digital camera with an electronic viewfinder and a 16:9 active sensor area. Records QuickTime ProRes (4444, 422 HQ or 422) files onto in-camera SxS PRO or SxS PRO+ cards.

Part No: K2.72023.0
LMS-3 Low Mode Support Set
The ARRI LMS-3 is a low mode plate with numerous 3/8-16 mounting points, two tape hooks and optional feet.

Part No: K2.72087.0
SMPTE 311 Cable for Alexa M 20m
The ARRI SMPTE Hybrid fiber/copper (signal and power) cable that connects ALEXA M or ALEXA XT M head and body.

Part No: K2.0006347
MAP-2 Adapter Plate w. Rod Support
The ARRI MAP-2 Adapter plate with rod support for the ALEXA MINI is a lightweight accessory plate providing multiple 1/4-20" and 3/8-16" mounting points and interfaces to mount RMB-3, MSB-1, BPA-4, and the CCH-2 handle.

Part No: K2.72014.0
Viewfinder Cable Long KC 152-S
The ARRI KC 152-S connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras.

Part No: K2.72097.0
Ground Glass 16:9 Blank 1200
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 16:9 mode with no markings. 1200 grit surface.

Part No: K2.72083.0
ALEXA Shoulder Pad SP-4
Attaches with velcro to the shoulder arch at the bottom of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA Studio, ALEXA XT, ALEXA XT M Body, ALEXA XT Plus or ALEXA XT Studio.

Part No: K2.0008271
WCU-4 Monitor Mount
Monitor mount to be mounted on top of the WCU-4. 1/4" screw for the monitor.

Part No: K2.72010.0
Battery Adapter Back V-lock BAB-V
The ARRI BAB-V attaches to the back of the ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA Studio, ALEXA HD, ALEXA HD Plus, ALEXA XT, ALEXA XT M body, ALEXA XT Plus or ALEXA XT Studio and accepts V-lock on-board batteries. Batteries can be hot-swapped.

Part No: K2.48827.0
ENG Adapter Fujinon (cmotion)
The ARRI ENG Adapter Fujinon (cmotion) cable connects the ARRI lens control system with Fujinon servo demands for remote focus and zoom control.

Part No: K0.0014799
ALEXA MINI Body
The 35 format film-style digital camera with lightweight and compact carbon body, 4:3/16:9 switchable active sensor area, support for the ARRI MVF-1 viewfinder, built-in remote control capabilities via ARRI Electronic Control System and Wi-Fi, support for cforce motors, built-in motorized ND filters, inerchangable lens mounts and ARRI Lens Data System.

Part No: K2.72026.0
ARS-1 Alexa Rain Shield
The ARRI ARS-1 is a raincover custom designed for ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA Studio, ALEXA XT, ALEXA XT Plus or ALEXA XT Studio.

Part No: K4.73025.0
Rod adapter 15mm for Alexa M
The ARRI Rod Adapter for the ALEXA M attaches to ALEXA M Bridge Plate Adapters (AMB-1/2)

Part No: K2.0006348
MSB-1 Side Bracket
The ARRI MSB-1 Side bracket for the ALEXA MINI is a cage side bracket for accessory interfaces featuring sturdy ARRI rosettes and 1/4- 20" and 3/8 -16" mounting points. The unit requires MAP-1 or MAP-2 on top and on the bottom of the camera body.

Part No: K2.72036.0
Remote Control Unit RCU-4
The ARRI RCU-4 is a compact and robust remote for all ALEXA and ALEXA XT cameras.

Part No: K2.72073.0
Frameglow Mask 4:3/16:9 Spherical
The ARRI Frameglow mask for ALEXA Studio or ALEXA XT Studio in 4:3 or 16:9 mode with spherical lenses.

Part No: K2.73011.0
Alexa M Case
Carry and shipping case that holds one ALEXA M or ALEXA XT M camera body and camera head with various accessories and cables.

Part No: K2.0008509
ALEXA MINI Broadcast Plate
Compatible with VCT- style plates such as the ARRI QRP-1. Offers a wide range of shoulder adjustments without affecting the placement of accessories fitted to the integrated 15mm LWS rod system.

Part No: K2.65239.0
Cable UMC-3/4 to ALEXA
Connects Universal Motor Controller CAM connector to the EXT connector on the ALEXA family of cameras. Provides camera RUN/STOP function and tally. Length: 0.8m/2.6ft

Part No: K2.48826.0
CABLE CAB-1 (cmotion)
The ARRI CAB-1 Cable is required for cmotion ENG adapters.

Part No: K2.72069.0
Ground Glass 4:3 Spherical 800
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 4:3 mode with spherical lenses.

Part No: K2.72086.0
ASB-1 Pair of Side Brackets for Alexa M
The ASB-1 are sidebrackets with numerous 3/8"-16 UNC threaded mounting points for accessory mounting.

Part No: K2.0006352
BPA-4 Bridge Plate Adapter
The ARRI BPA-4 Bridge Plate for the ALEXA MINI is the interface to traditional Cine style bridge plates like the BP-8 and BP-9. The unit requires that the MAP-2 is mounted on the camera.

Part No: K2.72040.0
Alexa Ethernet Remote Cable KC 157-S
The ARRI KC 157-S connects the Ethernet socket of the ALEXA and ALEXA XT family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin).

Part No: K2.72074.0
Frameglow Mask 4:3/Scope 2x
The ARRI Frameglow mask for ALEXA Studio or ALEXA XT Studio in 4:3 mode with 2x anamorphic lenses.

Part No: K2.72049.0
ARRICAM Eyepiece Adapter AEA-1
With this adapter the ALEXA Studio Optical Viewfinder OVF-1 can accept the ARRICAM Studio Eyepiece and extensions.

Part No: K2.0006876-1
ALEXA/AMIRA Power Supply Light 24/11.5A
Indoor power supply to be used together with the existing power cables for ALEXA & AMIRA.
The power supply has a 3-pin Female XLR Plug.

Part No: K2.0003426
XR Single Dock Thunderbolt with VFS
A dock for a single XR Capture Drive, Codex Capture Drive for Onboard S or Codex Transfer Drive. Provides drive access and management over a Thunderbolt connection.

Part No: K2.72090.0
Ground Glass 4:3 Spherical 1200
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 4:3 mode with spherical lenses.

Part No: K2.73004.0
AMD-1 Alexa M D-Bracket
The ARRI AMD-1 provides additional mounting options for the ALEXA M or ALEXA XT M camera head.

Part No: K2.0006186
RMB-3 Rod Mounting Bracket
The ARRI RMB-3 Rod Mounting Bracket provides support for a single 19mm rod or viewfinder mount (cross pipe).

Part No: K2.72021.0
Alexa Ethernet Cable KC-153-S
The ARRI KC 153-S connects the ETHERNET socket (Lemo 10 pin) on the ALEXA and ALEXA XT family of cameras to any standard RJ-45 Ethernet socket for updates, other service purposes or to remotely control the camera from a computer via the built-in web server.

Part No: K2.72095.0
Frameglow Mask Blank
The ARRI Frameglow Mask for Blank Ground glasses provides REC, BAT and FULL warning indicators in the bottom of the optical viewfinder frame when a blank ground glass is used on ALEXA Studio or ALEXA XT Studio.

Part No: K0.71220.0
EVF-1 Set for ALEXA Studio/ALEXA XT Studio
The ARRI EVF-1 set for ALEXA Studio/ALEXA XT Studio all you need to use the ALEXA Electronic Viewfinder EVF-1 on the ALEXA Studio or ALEXA XT Studio.

Part No: K0.71000.D
ALEXA Classic EV Basic Camera Set
A 35 format film-style digital camera with an electronic viewfinder and a 16:9 active sensor area. Records QuickTime ProRes (4444, 422 HQ or 422) files onto in-camera SxS PRO or SxS PRO+ cards.

Part No: K2.72030.0
Alexa Case
The ARRI ALEXA CASE is a carry and shipping case that holds one ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA XT or ALEXA XT Plus camera body with Electronic Viewfinder EVF-1, viewfinder mounting bracket, Center Camera Handle CCH-1 or Side Camera Handle SCH-1 and various accessories and cables.

Part No: K2.0006157
ARRI - SXR Capture Drive 2 TB
The ARRI - CODEX SXR Capture Drive is a small size, high performance, high reliability industrial grade solid state drive technology in a rugged aluminum enclosure.

Part No: K2.0006170
ALEXA MINI EXT-RS Adapter
Short adapter cable that connects to the EXT connector of the ALEXA Mini and provides a 3-pin RS connector.

Part No: K2.72102.0
UAP-1 Universal Adapter Plate
The ARRI UAP-1 allows the camera can be quickly moved from a traditional ARRI cine-style bridge plate (including BP-3, 5, 8 or 9) to a Steadicam dove tail plate. It attaches to the front and back foot of ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA XT, ALEXA XT M body or ALEXA XT Plus with a tight and secure fit.

Part No: K2.72088.0
Ground Glass 16:9 Spherical 800
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 16:9 mode with spherical lenses.

Part No: K2.73007.0
MDB-1 Alexa M Dovetail Bracket
The ARRI MDB-1 attaches to ALEXA M D-Bracket AMD-1 (K2.73004.0). Holds ALEXA M Dovetail Plate MDP-1 (K2.73008.0).

Part No: K2.0006471
BAP-1 Battery Plate
The ARRI BAP-1 battery plate allows industry standard battery mounts such as the V-Mount and Gold Mount to fit to 15mm LWS rods.

Part No: K2.72031.0
Alexa 12V Accessory Cable KC 154-SP-S
The Kc 154-SP-S is a spiral cable that connects the 12V socket on the ALEXA and ALEXA XT family of cameras (Lemo 2 pin) to any accessory with an XLR 4 pin socket.

Part No: K4.52722.0
Ground Glass/Frameglow Tool
The ARRI Ground Glass/Frameglow is a tool with an M3 thread on one end for removing ALEXA Studio, ALEXA XT Studio, ARRICAM Studio and ARRICAM Lite ground glasses as well as ALEXA Studio and ALEXA XT Studio field lenses.

Part No: K0.0000960
CFast 2.0 Adapter and Card Set
The ARRI CFast 2.0 Adapter and Card Set is an adapter that fits into the ALEXA XR Module for holding one CFast 2.0 card for in-camera recording of ProRes or DNxHD plus five CFast 2.0 120 GB memory cards.

Part No: K2.72002.0
WA-1 Wedge Adapter
The WA-1 attaches to the bottom of the front foot of ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA XT, ALEXA XT M body or ALEXA XT Plus.

Part No: K2.0006942
ARRI - SXR Capture Drive 1 TB
The ARRI - CODEX SXR Capture Drive is a small size, high performance, high reliability industrial grade solid state drive technology in a rugged aluminum enclosure.

Part No: K2.0006990
BAP-2 Battery Adapter Plate
Battery adapter plate that is part of the cage and attaches to the side of the camera.
The plate provides IDX and AB compatible mounting points for battery adapters like the Bebob V-Mount adapter.

Part No: K2.72082.0
SMPTE Cleaning Pen for Alexa M
The ARRI SMPTE Pen is a tool for cleaning the optical fiber ends of the SMPTE cable connectors.

Part No: K2.72089.0
Ground Glass 16:9 Spherical 1200
The ARRI Ground glass for ALEXA Studio or ALEXA XT Studio in 16:9 mode with spherical lenses

Part No: K2.72125.0
Heated Eyecup HE-6
The ARRI HE-6 is a heated eyecup for the ALEXA EVF-1 eyepiece.

Part No: K2.73008.0
MDP-1 Alexa M Dovetail Plate
The ARRI MDP-1 ia the counterpart to ALEXA M Dovetail Bracket MDB-1 (K2.73007.0).

Part No: K2.0006807
CSP-1 Shoulder Pad
The ARRI CSP-1 for the ALEXA MINI clamps on 15mm LWS rods forward or backwards of the base-plate to suit best balance on the shoulder. The camera rig can rest on the CSP-1 on a flat surface.

Part No: K0.71032.0
Alexa 3D Cable set
The ARRI ALEXA 3D Cable Set contains one ALEXA EXT to EXT Cable (K2.72032.0) for sensor and HD outputs sync and one ALEXA Ethernet to Ethernet Cable (K2.72033.0) for camera settings sync.

Part No: K2.72063.0
EVA-1 Viewfinder adapter
The ARRI EVA-1 is a mechanical cover for the ALEXA Studio or ALEXA XT Studio viewfinder

Part No: K2.72141.0
IFM Empty Filter Frame
The ARRI IFM Empty Filter Frame is an empty IFM filter frame for the creation of one custom IFM-1 filter for specialty applications.

Part No: KB.72002.D
ALEXA SXT Plus Pro Camera Set
including in-camera recording of ProRes 4K UHD (3840x2160 pixels) and ProRes 4K Cine (4096x2636 pixels).

Part No: K2.72017.0
LB-1 Levelling Block
The ARRI LB-1attaches to the bottom of the back foot of ALEXA, ALEXA Plus, ALEXA Plus 4:3, ALEXA M body, ALEXA XT, ALEXA XT M or ALEXA XT Plus.

Part No: K2.72137.0
Precision IRND Filter Set (Basic)
The ARRI Precision IRND Filter Set is the basic filter set includes the IFM Optical Clear, FSND filters 0.6, 1.2 and 1.8, the IFM Shim, the filter insertion tool (the Ground Glass/Frameglow tool K4.52722.0), the IFM/Extenders Depth Gauge DG-1 and a case with space for 8 FSND filters.

Part No: K5.35821.0
ARRI PL Camera Cover
ARRI branded plastic lens mount cover for any camera with PL mount.

Part No: K2.72018.0
SD Card - 2GB
The ARRI SD is for importing ARRI Look Files, camera set up files, frame line files, feature license keys and custom lens tables for the Lens Data Archive (LDA).

Part No: K2.72070.0
Ground Glass 4:3 SCOPE 2X 800
The ARRI Ground Glass for ALEXA Studio or ALEXA XT Studio in 4:3 mode with 2x anamorphic lenses.

Part No: K2.74001.0
VMB-3 Viewfinder Mounting Bracket
The ARRI VMB-3 is a sturdy bracket that attaches the Electronic Viewfinder EVF-1 to all ALEXA cameras (Electronic Viewfinder Adapter EVA-1 additionally required for ALEXA Studio)
