These sites use cookies. By continuing to browse the site you are agreeing to our use of cookies.
HIDE OK

Your cart

(0)

Arri - Matte Boxes

S-ARRI Reduction Clamp-on ring 110mm
Part No: S-K2.66146.0
S-ARRI Reduction Clamp-on ring 104mm for MMB-2
The ARRI Reduction Clamp-on ring 104mm Original Price: 780SEK - New Item
580áSEK ORDER
Still Lens Clamp-On Ring 77mm
Part No: K2.66136.0
Still Lens Clamp-On Ring 77mm
77mm threaded adapter ring with outside diam. 114mm
575áSEK ORDER
MB20/29 SYSTEM II Side Flags Pair
Part No: K0.60029.0
MB20/29 SYSTEM II Side Flags Pair
The ARRI MB20/29 SYSTEM II Side Flags Pair Can be used simultaneously with both top- and bottom-mounted eyebrow flags. Compatible with 16x9 Wide Angle System. Not compatible with MB-20 System-I.
4á490áSEK ORDER
SMB-2 Side Flags ANAM (Pair)
Part No: K2.0002575
SMB-2 Side Flags ANAM (Pair)
The ARRI SMB-2 Side Flags ANAM (Pair) is a pair of side flags with advanced adjusters for 2:1 ratio sunshade
11á910áSEK ORDER
LMB 4x5 Flag Holders
Part No: K2.0013825
LMB 4x5 Flag Holders
compatible with LMB-25.
1á620áSEK ORDER
Filter Frame Combo 4x5.65' / 4x4
Part No: K2.65095.0
Filter Frame Combo 4x5.65' / 4x4
The ARRI F5 Filter Frame Combo 4x5,65" / 4x4 with cut outs to center 4x4 filter (4x5.65 filter orients horizontally when inserted from above).
1á775áSEK ORDER
MMB-2 Basic Module double 4x5,65''
Part No: K2.66169.0
MMB-2 Basic Module double 4x5,65''
The ARRI MMB-2 Basic Module double 4x5,65''
7á000áSEK ORDER
Clamp Adapter 136mm diam.
Part No: K2.0014348
Clamp Adapter 136mm diam.
For Matte Box LMB-5/15/25 & 4x5.
1á620áSEK ORDER
R2 Reflex Prevention Ring 128mm wide-angle
Part No: K2.65090.0
R2 Reflex Prevention Ring ě 128mm wide-angle
For use with Fujinon HAe3x5.
1á150áSEK ORDER
Diopter Adapter 138 mm - 4,5
Part No: K2.0014357
Diopter Adapter 138 mm - 4,5"
Compatible with Diopter Frame and Diopter Stage 138 mm
1á150áSEK ORDER
R5 Screw-In Reduction ring 100mm-87mm (Phase Out)
Part No: K2.47225.0
R5 Screw-In Reduction ring 100mm-87mm (Phase Out)
For Zeiss Vario Sonnar.
450áSEK ORDER
SMB-1 2-Filter Stage incl. 2 Filter Frames
Part No: K2.0001465
SMB-1 2-Filter Stage incl. 2 Filter Frames
The ARRI SMB-1 2-Filter Stage incl. 2 Fitler Frames stackable filter stage for two filter frames (rotatable as pair) with geared frame drive and two integrated and independent "filter/tray catchers"
8á565áSEK ORDER
R1 138mm Filter Ring ě 114mm
Part No: K2.52194.0
R1 138mm Filter Ring ě 114mm
With rubber sleeve for Master Prime Lenses, UP14mm, UP180mm, LDS-UP 14mm and LDS-UP 180mm. Takes reduction rings size R4.
2á925áSEK ORDER
LMB-6 3-Stage Set
Part No: KK.0005800
LMB-6 3-Stage Set
For lenses from 95mm to 162mm

19á950áSEK ORDER
R4 Screw-In Reduction Ring 114mm-94mm
Part No: K2.65156.0
R4 Screw-In Reduction Ring 114mm-94mm
The ARRI R4 Screw-in reduction ring from 114mm to 94mm for Fujinon 14x5.8 mm (Sony EX-1, EX-3); Canon Xl-H1; Sony HXR-NX5
460áSEK ORDER
Filter frame Combo 4x5.650
Part No: K2.66133.0
Filter frame Combo 4x5.650"/4x4"
For Matte Box LMB-5/15/25, MMB-2 or MMB-1 top load
1á150áSEK ORDER
S-ARRI Reflex Prevention Ring  134mm
Part No: S-K2.65245.0
S-ARRI Reflex Prevention Ring 134mm
The ARRI Reflex Prevention Ring 134mm Original Price: 390SEK - New Item
285áSEK ORDER
SMB-2 Case
Part No: K2.0003961
SMB-2 Case
The ARRI Case for the SMB-2 with variable dividers.
8á775áSEK ORDER
LMB 4x5 Basic Module
Part No: K2.0013589
LMB 4x5 Basic Module
The starting point for the modular LMB 4x5 matte box
9á090áSEK ORDER
SMB-1 Sunshade ANAM
Part No: K2.0001466
SMB-1 Sunshade ANAM
The ARRI SMB-1 Sunshade ANAM is a matte box hood with a 2:1 format ratio, for use with the SMB-1 in combination with anamorphic side flags and anamorphic set of mattes.
1á775áSEK ORDER
Light Protection Ring Pro Set
Part No: KK.0005754
Light Protection Ring Pro Set
Includes all 7 rings + flexible light protection
3á865áSEK ORDER
MMB-2 Reduction/Clamp-On Ring 80mm
Part No: K2.66160.0
MMB-2 Reduction/Clamp-On Ring 80mm
MMB-2 Clamp-on Reduction Ring 80mm.
990áSEK ORDER
R1 138mm Filter Ring ě 125mm
Part No: K2.34260.0
R1 138mm Filter Ring ě 125mm
For AngÚnieux 25-250 HP with rubber sleeve and connection ring.
4á595áSEK ORDER
SMB-2 Side Flags (Pair)
Part No: K2.0002269
SMB-2 Side Flags (Pair)
The ARRI SMB-2 Side Flags (Pair) is a Pair of side flags with advanced adjusters for 4:3 ratio sunshade
10á550áSEK ORDER
LMB 4x5 Clamp Adapter 85mm
Part No: K2.0015065
LMB 4x5 Clamp Adapter 85mm
For Fujinon MK 18-55 mm, Celere Prime lenses
1á620áSEK ORDER
MB-20/29 Console for Lightweight Support
Part No: K2.65025.0
MB-20/29 Console for Lightweight Support
The ARRI MB-20/29 Console for Lightweight Support is for use with MB-20 in swingaway mode with lightweight support rods conforming to ARRI standard.
2á455áSEK ORDER
R4 Screw-In Reduction Ring 114mm-105mm
Part No: K2.65096.0
R4 Screw-In Reduction Ring 114mm-105mm
The ARRI R4 Screw-in Reduction ring 114mm to 105mm
460áSEK ORDER
Diopter Stage
Part No: K2.0014745
Diopter Stage
For using 138 mm close-up diopters with a clip on matte box
5á120áSEK ORDER
R6 Reduction Ring 87mm-80mm (Phase Out)
Part No: K2.47226.0
R6 Reduction Ring 87mm-80mm (Phase Out)
The ARRI R6 Screw-in Reduction Ring 87mm to 80mm is only usable with R3 filter ring K2.49109.0
450áSEK ORDER
SMB-1 1-Filter Stage incl. 1 Filter Frame
Part No: K2.0001462
SMB-1 1-Filter Stage incl. 1 Filter Frame
The ARRI SMB-1 1-Fitler Stage incl. 1 Filter Frame is a stackable filter stage for one filter frame (rotatable) with "filter/tray catcher"
6á265áSEK ORDER
R4 Reduction Ring 114mm-104mm
Part No: K2.52195.0
R4 Screw-In Reduction Ring 114mm-104mm
The ARRI R4 Screw-in Reduction Ring 114mm to 104mm for LDS Ultra Primes 16-135 mm.
460áSEK ORDER
R1 6'' Tilting Filter Ring 150mm
Part No: K2.0001174
R1 6'' Tilting Filter Ring 150mm
2-part bellow ring (R1) designed to follow the tilt movement of the SMB-1. Compatible with all R8 screw-on rings (and R4 screw-on rings via K2.66095.0)
3á240áSEK ORDER
Console for MMB-2
Part No: K2.66127.0
Console for MMB-2
The ARRI Lightweight Support Console for MMB-2
1á360áSEK ORDER
Triple Filter Frame 4x5.650''
Part No: K2.0006085
Triple Filter Frame 4x5.650''
Used in combination with either the SMB-1 or SMB-2, the triple filter frame stacks two or three glass filters together in a single filter frame that occupies two regular matte box slots and prevents unwanted reflections between filter surfaces.
2á715áSEK ORDER
SMB-2 Anamorphic Upgrade Set
Part No: KK.0006728
SMB-2 Anamorphic Upgrade Set
The ARRI SMB-2 Anamorphic Upgrade Set is for the SMB-2, a studio matte box for filter sizes up to 4" x 5.65". It is designed for bigger wide-angle prime lenses as well as zooms.
12á955áSEK ORDER
LMB 4x5 Extra Non-Rotatable Filter Stage
Part No: K2.0014006
LMB 4x5 Extra Non-Rotatable Filter Stage
Used as a stand-alone filter stage with all LMB 4x5 clamp adapters.
3á345áSEK ORDER
SMB-1 Mattes ANAM
Part No: K2.0000676
SMB-1 Mattes ANAM
The ARRI SMB-1 Mattes ANAM is a set of 5x mattes with opening ratios 2:1 and 1x plain protective cover to fit the SMB-1 Sunshade ANAM.
2á505áSEK ORDER
R4 Screw-In Reduction Ring 114mm-98mm
Part No: K2.65044.0
R4 Screw-In Reduction Ring 114mm-98mm
The ARRI R4 Screw-in Reduction Ring 114mm to 98mm
405áSEK ORDER
Connection Ring Flexible 52mm
Part No: K2.66156.0
Connection Ring Flexible 52mm
MMB-2 Threaded Connection Ring 52mm.
575áSEK ORDER
MMB-2 Reduction/Clamp-On Ring 95mm
Part No: K2.66147.0
MMB-2 Reduction/Clamp-On Ring 95mm
MMB-2 Clamp-on Reduction Ring 95mm.
990áSEK ORDER
R1 138mm Filter Ring ě 124mm
Part No: K2.34260.C
R1 138mm Filter Ring ě 124mm
For Cooke 20-250.
4á595áSEK ORDER
SMB-2 Top/Bottom Flag
Part No: K2.0002275
SMB-2 Top/Bottom Flag
The ARRI SMB-2 Top/Bottom Flag is a the top and bottom flag with advanced adjusters and foldable side flaps
7á520áSEK ORDER
LMB 4x5 Clamp Adapter 100mm
Part No: K2.0015103
LMB 4x5 Clamp Adapter 100mm
For Schneider Xenon FF Prime lenses
1á620áSEK ORDER
LMB-25 Clamp Adapter Set
Part No: KK.0005805
LMB-25 Clamp Adapter Set
For Matte Box LMB-5/15/25
14á520áSEK ORDER
LMB-6 Set of 5 Mattes
Part No: K2.66243.0
LMB-6 Set of 5 Mattes
The ARRI LMB-6 Set of Masks are available as the LMB-6 has its own sets of five mattes that can be clipped on the hood.
2á090áSEK ORDER
Diopter Frame 138 mm
Part No: K2.0013740
Diopter Frame 138 mm
For using 138 mm close-up diopters with a clip on matte box
3á445áSEK ORDER
Clamp Adapter 114mm diam.
Part No: K2.0014396
Clamp Adapter 114mm diam.
For Matte Box LMB-5/15/25 & 4x5
1á620áSEK ORDER
SMB-1 Basic
Part No: K2.0001516
SMB-1 Basic
The ARRI SMB-1 Basic module is a studio matte box 6.6" x 6.6" with 4:3 ratio sunshade, integrated extension module (without tilt function) and back plate (R1 ring compatible)
17á550áSEK ORDER
R1 6
Part No: K2.52197.0
R1 6" Filter Ring ě 114mm
With rubber sleeve for Master Prime Lenses, UP14mm, UP180mm, LDS-UP 14mm and LDS-UP 180mm. Takes reduction rings size R4
2á925áSEK ORDER
LMB-6 Top/Bottom Flag
Part No: K2.66231.0
LMB-6 Top/Bottom Flag
A Carbon Fiber flag for LMB-6 Matte Box
4á180áSEK ORDER
S-ARRI Reduction Clamp-on ring 80mm
Part No: S-K2.66048.0
S-ARRI MMB-1 Clamp Adapter Ring 94mm - 138mm
ARRI's MMB-1 Clamp Adapter Ring 94mm - 138mm Original Price: 735SEK - New Item
350áSEK ORDER
Triple Filter Frame 6.6x6.6''
Part No: K2.0005906
Triple Filter Frame 6.6x6.6''
Used in combination with either the SMB-1 or SMB-2, the triple filter frame stacks two or three glass filters together in a single filter frame that occupies two regular matte box slots and prevents unwanted reflections between filter surfaces.
3á135áSEK ORDER
SMB-2 Accessory Set
Part No: KK.0006727
SMB-2 Accessory Set
The ARRI SMB-2 Accessory Set is for the SMB-2, a studio matte box for filter sizes up to 4" x 5,65". It is designed for wide-angle prime lenses as well as zooms.
8á775áSEK ORDER
LMB 4x5 Extra Rotatable Filter Stage
Part No: K2.0013460
LMB 4x5 Extra Rotatable Filter Stage
An optional 360░ rotatable third filter stage
5á535áSEK ORDER
SMB-1 Mattes SPH/ANAM
Part No: K2.0001161
SMB-1 Mattes SPH/ANAM
The ARRI SMB-1 Mattes SPH/ANAM is a set of 5x mattes with openings ratio 2:1 and 1x plain protective cover to fit the SMB-1 Sunshade "spherical" version.
2á505áSEK ORDER
R4 Screw-In Reduction Ring 114mm-110mm
Part No: K2.65045.0
R4 Screw-In Reduction Ring 114mm-110mm
The ARRI R4 Screw-in Reduction Ring 114mm to 110mm for Cooke S4 and LDS Cooke S4
420áSEK ORDER
R8 Screw-In Reduction Ring 150-142mm
Part No: K2.66060.0
R8 Screw-In Reduction Ring 150-142mm
For Red 18-85 Zoom.
510áSEK ORDER
Connection Ring Flexible 58mm
Part No: K2.66157.0
Connection Ring Flexible 58mm
MMB-2 Threaded Connection Ring 58mm.
575áSEK ORDER
MMB-2 Reduction/Clamp-On Ring 104mm
Part No: K2.66146.0
MMB-2 Reduction/Clamp-On Ring 104mm
MMB-2 Clamp-on Reduction Ring 104mm.
990áSEK ORDER
R1 138mm Filter Ring ě 87mm
Part No: K2.34290.0
R1 138mm Filter Ring ě 87mm
(no reduction rings) For ZEISS Vario Sonnar T2/10-100II, and T2.2/11-110.
3á445áSEK ORDER
SMB-2 138mm Tilting Ring R2
Part No: K2.0002477
SMB-2 138mm Tilting Ring R2
The ARRI SMB-2 tilting ring is a 2-part bellow ring (R2) designed to follow the tilt movement of the SMB-2. Compatible with all R4 screw-on rings.
3á030áSEK ORDER
LMB 4x5 Clamp Adapter 162mm
Part No: K2.0015075
LMB 4x5 Clamp Adapter 162mm
For Angenieux Optimo 24-290 mm and 28-340 mm
1á620áSEK ORDER
R7 Clamp-On Ring 130-128mm
Part No: K2.47687.0
R7 Clamp-On Ring 130-128mm
Not for use with Fujinon HAe3x5.
805áSEK ORDER
LMB-6 Pro Set
Part No: KK.0005804
LMB-6 Pro Set
For lenses from 95mm to 162mm

39á170áSEK ORDER
Filter Frame 4x4
Part No: K2.65098.0
Filter Frame 4x4
The ARRI traditional film-style 4"x4" filter frame with light shielding all around filter.
1á410áSEK ORDER
R4 Screw-In Reduction Ring 114mm-95mm WA
Part No: K2.65273.0
R4 Screw-In Reduction Ring 114mm-95mm WA
The ARRI R4 Screw-in Reduction Ring 114mm to 95mm Wide Angle
470áSEK ORDER
R1 6
Part No: K2.66057.0
R1 6" Universal Filter Ring ě 150mm
For VP1, VP2, VP3, Cooke 18-100 and Cinetal 25-250. Takes reduction rings size R8.
2á925áSEK ORDER
LMB Accessory Adapter
Part No: K2.0013014
LMB Accessory Adapter
3/8ö accessory shoe with sliding rail for better positioning
1á460áSEK ORDER
Clamp Adapter 95mm diam.
Part No: K2.47241.0
Clamp Adapter 95mm diam.
For Matte Box LMB-5/15/25
1á775áSEK ORDER
SMB-1 Tilt
Part No: K2.66262.0
SMB-1 Tilt
The ARRI SMB-1 Tilt module is for a Studio matte box 6.6" x 6.6" with 4:3 ratio sunshade, integrated tilt/extension module and back plate (R1 ring compatible)
21á935áSEK ORDER
R3 4 1/2'' Filter Ring ° 114mm
Part No: K2.52205.0
R3 4 1/2'' Filter Ring ° 114mm
With rubber sleeve for UP 14mm, UP 180mm, LDS-UP 14mm and LDS-UP 180m m. Not compatible with Master Prime Lenses 14mm and 16mm. Takes reduction rings size R4.
2á715áSEK ORDER
LMB-6 Clamp Adapter 162mm
Part No: K2.66234.0
LMB-6 Clamp Adapter 162mm
162mm Clamp adapter for ARRI LMB-6 matte box.
1á880áSEK ORDER
R3 4 1/2
Part No: K2.66067.0
R3 4 1/2" Filter Ring ě 114mm, Internal Focus
For use with wide-angle camcorder and similar lenses. Not compatible with Master Prime Lenses 14mm and 16mm. Takes reduction rings size R4.
2á195áSEK ORDER
MMB-2 Mattes set
Part No: K2.66159.0
MMB-2 Mattes set
Set of 5 Matter for the MMB-2
2á405áSEK ORDER
SMB-2 Filter Stage Adapter for SMB-1
Part No: K2.0006526
SMB-2 Filter Stage Adapter for SMB-1
This step down adapter permits SMB-2 filter stages to mount to the SMB-1 matte box without affecting wide angle coverage.
3á865áSEK ORDER
SMB-2 Lightshield Set
Part No: KK.0006726
SMB-2 Lightshield Set
The ARRI SMB-2 is a studio matte box for filter sizes up to 4" x 5,65". It is designed for wide-angle prime lenses as well as zooms.
15á200áSEK ORDER
LMB 4x5 Tilt and Flex Adapter
Part No: K2.0014206
LMB 4x5 Tilt and Flex Adapter
A flexible rubber donut adapter
1á830áSEK ORDER
R4 Screw-In Reduction Ring 114mm-100mm
Part No: K2.65046.0
R4 Screw-In Reduction Ring 114mm-100mm
The ARRI R4 Screw-in Reduction ring 114mm to 100mm for Fujinon XS8x4mm (Sony EX-3) With internal thread for use with R5 reduction rings
405áSEK ORDER
R8 Screw-In Reduction Ring 150-134mm
Part No: K2.66058.0
R8 Screw-In Reduction Ring 150-134mm
For Master Prime Lens 150 mm + ARRI/Fujinon Alura Zooms.
510áSEK ORDER
Sign in

Your cart

(0)