These sites use cookies. By continuing to browse the site you are agreeing to our use of cookies.
HIDE OK

Your cart

(0)

Arri - WRS Systems

Cable UMC-4 RS In to open end
Part No: K2.0002674
Cable UMC-4 RS In to open end
Open-end cable with 3pin connector to UMC-4 RS IN on one side. Length: 1.5m/5ft
1 045 SEK ORDER
Single Motor Controller SMC-1
Part No: K2.0001469
Single Motor Controller SMC-1
The ARRI Single Motor Controller SMC-1 is a Compact 1-axis wireless motor controller designed for weight and size-critical setups such as Steadicam or camera drones.
19 845 SEK ORDER
Cable LBUS 6m
Part No: K2.0006755
Cable LBUS 6m
ARRI and cmotion offer a wide range of cables for devices that use the LBUS communication protocol, such as the cforce mini and other cforce lens motors, the ALEXA Mini and the AMC-1.
1 880 SEK ORDER
Handgrip Pan Bar Adapter 20 mm
Part No: K2.0012919
Handgrip Pan Bar Adapter 20 mm
Pivotable clamp arm to attach Master Grips to fluid head pan handles with 20mm tube diameter.
3 655 SEK ORDER
Cable UMC to PSC IF for Epic
Part No: K2.65270.0
Cable UMC to PSC IF for Epic
The ARRI UMC to PSC IF for Epic Cable enables EPIC REC start/stop via ARRI wireless hand units and UMC.
6 215 SEK ORDER
Universal Mounting Arm 120mm
Part No: K2.65020.0
Universal Mounting Arm 120mm
Universal Mounting Arm UMA-120
4 125 SEK ORDER
Cforce plus Basic Set
Part No: KK.0008824
Cforce plus Basic Set
Connects to ARRI’s AMC-1 and UMC-4 motor controllers
25 590 SEK ORDER
KK.0024474 Wireless Receiver Support for WCU-4
Part No: KK.0024474
Wireless Receiver Support for WCU-4
This set provides a highly configurable mount for external devices.
3 345 SEK ORDER
Part No: K2.65234.0
UMC-3A to Canon 20P + Rec (Y-cable)
The ARRI UMC-3A CAM connector to CANON ENG connectors. For UMC-3 power supply, CANON ENG lens control and camera RUN/STOP trigger.
Price on Request
Part No: K2.0001914
CLM-3 gear module 0.5, 96 teeth
The ARRI CLM-3 gear 0,5/96 teeth for Canon ENG focus/zoom.
1 360 SEK ORDER
Marking Disc - Cylindrical
Part No: K2.65162.0
Marking Disc - Cylindrical
The ARRI Marking Disc - Cylindrical is for Wireless Compact Unit WCU-3
450 SEK ORDER
Master Grip Prime Set for ALEXA Plus/Studio
Part No: KK.0013214
Master Grip Prime Set for ALEXA Plus/Studio
Pre-configured set with Master Grips and accessories, suitable for controlling prime lenses on ALEXA Plus/Studio cameras.
60 585 SEK ORDER
Part No: K2.0002727
Cable SMC/EMC to PSC
Connects SMC-1 and EMC-1 with Power System Connector (PSC) cables. Length: 0.7m/2ft. Additional Power Supply Connector (PSC) cable required.
1 670 SEK ORDER
Part No: K2.0002672
Cable UMC-4 RS In to PSC
Connects RS IN connector on UMC-4 with Power System Connector (PSC) cables. Length: 0.7m/2ft. Additional Power Supply Connector (PSC) cable required.
1 565 SEK ORDER
Part No: K2.0002046
UMC-4 connector module with two serial connectors
The ARRI UMC-4 Connector module with two serial connectors is a standard serial connector module (7 pin) for Universal Motor Controller UMC-4.
3 550 SEK ORDER
Cable LBUS 3m
Part No: K2.0006754
Cable LBUS 3m
ARRI and cmotion offer a wide range of cables for devices that use the LBUS communication protocol, such as the cforce mini and other cforce lens motors, the ALEXA Mini and the AMC-1.
1 670 SEK ORDER
Handgrip Pan Bar Adapter 18 mm
Part No: K2.0012918
Handgrip Pan Bar Adapter 18 mm
Pivotable clamp arm to attach Master Grips to fluid head pan handles with 18mm tube diameter.
3 760 SEK ORDER
WCU-4 Case
Part No: K2.72146.0
WCU-4 Case
The ARRI WCU-4 Case with compartments for one WCU-4, 10 marking rings, 3 batteries, one charger, three CLM motors, one UMC-3A, one ZMU-3A with pan handle, various gear rings, cables and mounting accessories.
4 180 SEK ORDER
Part No: K2.65063.0
Cable UMC-3/4 to Cine Tape Measure (coiled)
Connects Universal Motor Controllers to Cine Tape Measure.
1 670 SEK ORDER
Part No: K2.0013040
Cable LBUS (angled) to LBUS (angled) 60 cm
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.6m/2ft
2 195 SEK ORDER
K2.0036900 ERM LCS to FS CAN Bus Adapter Cable 0.2m/0.65ft
Part No: K2.0036900
ERM LCS to FS CAN Bus Adapter Cable 0.2m/0.65ft
Spare Cable for ERM-2400
2 090 SEK ORDER
Cable SMC/EMC to D-Tap
Part No: K2.0002682
Cable SMC/EMC to D-Tap
Connects SMC-1 and EMC-1 motor controllers to D-Tap power source. Length: 0.7m/2ft.
1 565 SEK ORDER
Part No: K2.0002055
CLM-3 gear with 48 pitch, 90 teeth
The ARRI CLM-3 gear with 48 pitch, 90 teeht for Panavision zoom.
1 360 SEK ORDER
Cable UMC-4 RS IN to RS
Part No: K2.0001637
Cable UMC-4 RS IN to RS
The ARRI UMC-4 RS IN to RS cable connects RS connector on camera side to RS IN connector on UMC-4. Provides power supply and camera RUN/STOP function. Length: 0.5m
1 775 SEK ORDER
Master Grip Zoom Set for ALEXA Plus/Studio
Part No: KK.0013213
Master Grip Zoom Set for ALEXA Plus/Studio
Pre-configured set with Master Grips and accessories, suitable for controlling zoom lenses on ALEXA Plus/Studio cameras.
60 585 SEK ORDER
Cable UMC-4 RS In to D-Tap
Part No: K2.0002668
Cable UMC-4 RS In to D-Tap
Connects RS IN connector on UMC-4 to D-Tap power source. Length: 0.5m/1.6ft
1 565 SEK ORDER
Cable UMC to Sony F55
Part No: K2.0000321
Cable UMC to Sony F55/PSC
Connects Universal Motor Controller CAM connector to Sony F5/F55 DC OUT connector and and Power System Connector (PSC) cables. Provides camera RUN/STOP function and tally. Length: 2x 0.3m/1ft. Additional Power Supply Connector (PSC) cable required.
2 820 SEK ORDER
Cforce Mini Lens Motor Unit
Part No: K2.0006354
Cforce Mini Lens Motor Unit
CMotion and ARRI have partnered up to develop the new intelligent cforce mini motor. The small and lightweight lens motor moves lenses on weight-optimized camera setups with remarkable speed and torque
19 325 SEK ORDER
Handgrip Pan Bar Clamp Universal
Part No: K2.0012920
Handgrip Pan Bar Clamp Universal
Pivotable clamp arm to attach Master Grips to fluid head pan handles with up to 32mm tube diameter.
3 760 SEK ORDER
Pre-Marked Focus Ring 0,25m
Part No: K2.72129.0
Pre-Marked Focus Ring 0,25m
The ARRI Pre-Marked Focus Ring for the WCU-4 enables focus mapping with the Wirles Compact Unit WCU-4 and the Unversal Motor Controller UMC-4 or all ALEXA cameras with Plus module.
345 SEK ORDER
Cable PSC to XLR-3
Part No: K2.65206.0
Cable PSC to XLR-3
Power supply cable with ARRI universal Power System Connector (PSC). Connects ARRI PSC control cables to batteries with 3pole XLR socket. Length: 1.5m/5ft.
680 SEK ORDER
Part No: K2.0013042
Cable LBUS (angled) to LBUS (straight) 35 cm
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.35m/1.1ft
1 985 SEK ORDER
K2.0037120 ARRI ERM-2400 Ext 2.4GHz RXD-TXD Pro Set LCS
Part No: K2.0037120
ARRI ERM-2400 Ext 2.4GHz RXD-TXD Pro Set LCS
A pair of modules provides a reliable point-to-point radio link for the most demanding RF environments.
40 635 SEK ORDER
Cable TC OUT for RED Epic (Ambient)
Part No: K2.0003255
Cable TC OUT for RED Epic (Ambient)
Timecode output cable to Red Epic/Scarlet, Lemo 5pin to Lemo 4pin. Length: 0.4m/1.3ft.
890 SEK ORDER
Part No: K2.0001918
CLM-3 gear module 0.6, 84 teeth
The ARRI CLM-3 gear module 0,6/84 teeth for Fujinon ENG focus/zoom.
1 360 SEK ORDER
ARRI - Plain Marking Focus Ring for WCU-4
Part No: K2.72117.0
Plain Marking Focus Ring
Plain Marking Focus Ring for SXU-1 & WCU-4
280 SEK ORDER
Master Grip Prime Set for ALEXA Mini
Part No: KK.0013211
Master Grip Prime Set for ALEXA Mini
Pre-configured set with Master Grips and accessories, suitable for controlling prime lenses on ALEXA Mini cameras.
60 585 SEK ORDER
SXU-1 Case
Part No: K2.0003423
SXU-1 Case
The SXU-1 Carry Case is a dedicated case for the Single Axis Unit-1 and certain accessories.
3 030 SEK ORDER
ARRI WRS Antenna for ALEXA/WRS
Part No: 05.20112.0
ARRI WRS Antenna for ALEXA/WRS
WRS antenna for ALEXA Plus cameras and UMC-3 Motor Box.
305 SEK ORDER
Cforce Mini Clamp Console 19/15mm
Part No: K2.0006176
Cforce Mini Clamp Console 19/15mm
Compatible with CLM-5, cforce mini and cforce mini RF.
1 460 SEK ORDER
Cable Clip 15 mm
Part No: K2.0012921
Cable Clip 15 mm
Facilitates cable management around Master Grips and lens motors Clips on 15mm camera rods and Master Grips extensions
190 SEK ORDER
Pre-Marked Focus Ring 0,35m
Part No: K2.72130.0
Pre-Marked Focus Ring 0,35m
The ARRI Pre-Marked Focus Ring for the WCU-4 enables focus mapping with the Wirles Compact Unit WCU-4 and the Unversal Motor Controller UMC-4 or all ALEXA cameras with Plus module.
345 SEK ORDER
Cable PSC to XLR-4
Part No: K2.65207.0
Cable PSC to XLR-4
Power supply cable with ARRI universal Power System Connector (PSC). Connects ARRI PSC control cables to batteries with 4 pin XLR socket. Length: 1.5m/5ft.
680 SEK ORDER
Part No: K2.0013044
Cable LBUS (angled) to LCS 80 cm
Connects LBUS devices (e.g. Master Grips) with LCS devices (e.g. ALEXA Plus/Studio cameras). Length: 0.80m/2.6ft
2 035 SEK ORDER
Cable TC IN BNC (Ambient)
Part No: K2.0003253
Cable TC IN BNC (Ambient)
Timecode-input cable, BNC right angle to Lemo 5-pin. Length: 0.4m/1.3ft.
680 SEK ORDER
Part No: K2.0001256
CLM-3 gear module - 25mm extra-wide
The ARRI CLM-3 gear module 0,8/32 pitch 60 teeth is a 25mm extra wide gear for moving lens barrels.
1 360 SEK ORDER
ARRI Single Axis Unit SXU-1
Part No: K2.0000071
ARRI Single Axis Unit SXU-1
The ARRI SXU-1 is a simple and affordable single-axis hand unit that allows wireless control of either focus or iris.
35 515 SEK ORDER
Master Grip Zoom Set for ALEXA Mini
Part No: KK.0013210
Master Grip Zoom Set for ALEXA Mini
Pre-configured set with Master Grips and accessories, suitable for controlling zoom lenses on ALEXA Mini cameras.
60 585 SEK ORDER
Rigger Grip for SXU-1
Part No: K2.0000849
Rigger Grip for SXU-1
The ARRI Rigger Grip for SXU-1 is an optional hand grip including a metal bar with UNC 3/8" -16 treads on two sides that allow mounting the SXU-1 on C-stands and other common on-set rigs.
1 565 SEK ORDER
CLM-4 Motor Unit
Part No: K2.72114.0
CLM-4 Motor Unit
The ARRI CLM-4 is flexible and affordable, the CLM-4 is a compact and lightweight lens motor with a set of four different gear modules.
19 845 SEK ORDER
Cforce Mini Clamp Insert 19/15mm
Part No: K2.0006175
Cforce Mini Clamp Insert 19/15mm
For 15 mm rods. Compatible with CLM-5, cforce mini and cforce mini RF clamp consoles.
220 SEK ORDER
Handgrip Extension 240 mm
Part No: K2.0012917
Handgrip Extension 240 mm
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips.
3 030 SEK ORDER
Pre-Marked Focus Ring 0,5m
Part No: K2.72131.0
Pre-Marked Focus Ring 0,5m
The ARRI Pre-Marked Focus Ring for the WCU-4 enables focus mapping with the Wirles Compact Unit WCU-4 and the Unversal Motor Controller UMC-4 or all ALEXA cameras with Plus module.
345 SEK ORDER
PSC-Anton Bauer D-tap Cable 0,6m
Part No: K2.65208.0
Cable PSC to D-TAP
Power supply cable with ARRI universal Power System Connector (PSC). Connects ARRI PSC control cables Anton Bauer D-TAP socket. Length: 0.6m/2ft.
1 045 SEK ORDER
Part No: K2.0012628
Cable LBUS (angled) to AMIRA EXT (straight) 80 cm
Connects AMIRA and ALEXA Mini EXT to LBUS devices (e.g. Master Grips). Includes one angled LBUS connector. Length: 0.8m/2.6ft
1 985 SEK ORDER
Cable TC OUT BNC (Ambient)
Part No: K2.0003254
Cable TC OUT BNC (Ambient)
Timecode output cable, Lemo 5pin to BNC right angle. Length: 0.4m/1.3ft.
680 SEK ORDER
Part No: K2.0001998
Cable SMC/EMC to RED EPIC
The ARRI SMC/EMC to RED EPIC cable connects SMC-1 and EMC-1 motor controllers to RED EPIC camera. Provides camera RUN/STOP function.
1 670 SEK ORDER
Hand Unit AC Power Supply HPS-1
Part No: K2.0000425
Hand Unit AC Power Supply HPS-1
The ARRI HPS-1 is the AC power supply for SXU-1 and WCU-4.
1 670 SEK ORDER
Master Grip Prime Set for AMIRA
Part No: KK.0013208
Master Grip Prime Set for AMIRA
Pre-configured set with Master Grips and accessories, suitable for controlling prime lenses on AMIRA cameras.
62 570 SEK ORDER
Cable UMC-4 to AMIRA
Part No: K2.0001604
Cable UMC-4 to AMIRA
Connects Universal Motor Controller CAM connector to AMIRA EXT connector. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft.
1 985 SEK ORDER
CLM-3 Motor Unit
Part No: K2.65143.0
CLM-3 Motor Unit
The ARRI CLM-3 has been redesigned from the ground up to meet the needs of working professionals on the set even better
29 250 SEK ORDER
Cforce Mini Gear m0.8/32p, 40t
Part No: K2.0003753
Cforce Mini Gear m0.8/32p, 40t
For ARRI/Zeiss focus/iris/zoom, Panavision focus, Fujifilm PL focus/iris/zoom. Compatible with CLM-5, cforce mini and cforce mini RF.
890 SEK ORDER
Handgrip Extension 160 mm
Part No: K2.0012911
Handgrip Extension 160 mm
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips.
2 925 SEK ORDER
Pre-Marked Focus Ring 1m for WCU-4
Part No: K2.72132.0
Pre-Marked Focus Ring 1m
The ARRI Pre-Marked Focus Ring for the WCU-4 enables focus mapping with the Wirles Compact Unit WCU-4 and the Unversal Motor Controller UMC-4 or all ALEXA cameras with Plus module.
345 SEK ORDER
Part No: K2.65209.0
Cable PSC to Hirose 12p
Power supply cable with ARRI universal Power System Connector (PSC). Connects ARRI PSC control cables to Hirose 12 pin video socket. Power supply and camera RUN/STOP function. Length: 0.6m/2ft.
1 045 SEK ORDER
Part No: K2.0012633
Cable CUB-1 to LANC
Connects LCUBE CUB-1 SERIAL connector to LANC connectors (e.g. Canon C300/500). Length: 0.4 m/1.3ft
2 035 SEK ORDER
K2.0023765 AMR Clamp Adapter
Part No: K2.0023765
AMR Clamp Adapter
The Clamp mounts to the ARRI Wireless Video Receiver WVR1s.
990 SEK ORDER
Cable TC IN/OUT (Ambient)
Part No: K2.0003252
Cable TC IN/OUT (Ambient)
Timecode IN/OUT cable, unidirectional, Lemo 5pin to Lemo 5pin. Length: 0.5m/1.6ft.
785 SEK ORDER
Cable SMC/EMC to LANC/D-Tap
Part No: K2.0001999
Cable SMC/EMC to LANC/D-Tap
The ARRI SMC-1 and EMC-1 connects motor controllers to LANC connectors (e.g. Canon C300/500) and D-Tap power source. Provides camera RUN/STOP function and tally. Length: 2x 0.5m/1.6ft
2 300 SEK ORDER
Cable UMC-3/4 to Video-RS/PSC
Part No: K2.65235.0
Cable UMC-3/4 to Video-RS/PSC
Connects Universal Motor Controller CAM connector to RS socket and Power System Connector (PSC) cables. Provides camera RUN/STOP. Length: 2x 0.3m/1ft. Additional Power Supply Connector (PSC) cable required.
2 560 SEK ORDER
Master Grip Zoom Set for AMIRA
Part No: KK.0013205
Master Grip Zoom Set for AMIRA
Pre-configured set with Master Grips and accessories, suitable for controlling zoom lenses on AMIRA cameras.
62 570 SEK ORDER
Outdoor Antenna, straight, for UMC-4 Motor Controller
Part No: K2.0002007
Outdoor Antenna, straight, for UMC-4 Motor Controller
The ARRI Outdoor Antenna (straight) for UMC-4 Motor Controller is a rugged outdoor antenna (straight, 61 mm) for Universal Motor Controller UMC-4.
345 SEK ORDER
Lanyard for WCU-4
Part No: K2.0002069
Lanyard for WCU-4
The ARRI Lanyard to the WCU-4 attaches to the unit via a pin. The lanyard offers great freedom of motion to the user.
730 SEK ORDER
Cable LBUS 0.2m
Part No: K2.0006749
Cable LBUS 0.2m
ARRI and cmotion offer a wide range of cables for devices that use the LBUS communication protocol, such as the cforce mini and other cforce lens motors, the ALEXA Mini and the AMC-1.
1 565 SEK ORDER
Handgrip Extension 80 mm
Part No: K2.0012913
Handgrip Extension 80 mm
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips.
2 820 SEK ORDER
OCU-1 Extended Set
Part No: KK.0022270
OCU-1 Extended Set
The Operator Control Unit OCU-1 enables operators to override and return focus, iris, and zoom controls from the Wireless Compact Unit WCU-4.
15 460 SEK ORDER
AMC-1 Active Motor Controller
Part No: K2.0005872
AMC-1 Active Motor Controller
The Active Motor Controller AMC-1 is a compact motor controller with an LBUS interface that can connect with up to three daisy-chained cforce motors.
19 845 SEK ORDER
Cable PSC to Fischer 11p
Part No: K2.65210.0
Cable PSC to Fischer 11p
Power supply cable with ARRI universal Power System Connector (PSC). Connects ARRI PSC control cables to ARRI 11pin accessory socket. Length: 0.6m/2ft.
1 410 SEK ORDER
Part No: K2.0012632
Cable CUB-1 to RED cameras
Connects LCUBE CUB-1 SERIAL to RED CTRL connector. Length: 0.4 m/1.3ft
1 725 SEK ORDER
Cable UMC-4 to RED Epic
Part No: K2.0002855
Cable UMC-4 to RED Epic
Connects Universal Motor Controller UMC-4 to RED Epic. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft Separate UMC-4 RS IN cable for power supply required.
1 880 SEK ORDER
Cable SMC/EMC to Sony F5/55
Part No: K2.0001997
Cable SMC/EMC to Sony F5/55
The ARRI Connects SMC-1 and EMC-1 motor controllers to Sony F5/55 camera. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft
1 775 SEK ORDER
K2.0023772 Accessory Mounting Rail AMR-110
Part No: K2.0023772
Accessory Mounting Rail AMR-110
This mounting rail offers two interface standards.
1 150 SEK ORDER
Master Grip Left Rocker MLR-1
Part No: K2.0009490
Master Grip Left Rocker MLR-1
The Master Grips combine effective camera stabilization with comprehensive lens and camera control.
24 550 SEK ORDER
Part No: K2.0001758
V-Plate for UMC-4/SMC-1/EMC-1
The ARRI V-Plate is a V-shaped plate with 3/8" screw that mounts on the back of UMC-4, SMC-1 and EMC-1 motor controllers.
890 SEK ORDER
Hand Strap for WCU-4
Part No: K2.0002067
Hand Strap for WCU-4
The ARRI Hand Strap for WCU-4 attaches to the Wireless Compact Unit 4 securing the users hand to the unit.
420 SEK ORDER
Cable LBUS 0.8m
Part No: K2.0006752
Cable LBUS 0.8m
ARRI and cmotion offer a wide range of cables for devices that use the LBUS communication protocol, such as the cforce mini and other cforce lens motors, the ALEXA Mini and the AMC-1.
1 565 SEK ORDER
Part No: KK.0013220
Handgrip Extension 240mm with 2x Cable Clip
Stainless steel handgrip extension compatible with rosette-based systems, such as Master Grips.
3 030 SEK ORDER
OCU-1 Basic Set
Part No: K2.0020002
OCU-1 Basic Set
The Operator Control Unit OCU-1 enables operators to override and return focus, iris, and zoom controls from the Wireless Compact Unit WCU-4.
12 220 SEK ORDER
Cable LBUS 0.5m
Part No: K2.0006751
Cable LBUS 0.5m
ARRI and cmotion offer a wide range of cables for devices that use the LBUS communication protocol, such as the cforce mini and other cforce lens motors, the ALEXA Mini and the AMC-1
1 565 SEK ORDER
Cable PSC to RS
Part No: K2.65211.0
Cable PSC to RS
Power supply cable with ARRI universal Power System Connector (PSC). Connects ARRI PSC control cables to ARRI 3 pin RS socket. Power supply and camera RUN/STOP function. Length: 0.6m/2ft.
1 045 SEK ORDER
Part No: K2.0012631
Cable CUB-1 to F5/55 cameras
Connects LCUBE CUB-1 to Sony F5/F55 cameras. Length: 0.4 m/1.3ft
1 725 SEK ORDER
WCU-4 Wireless Compact Unit
Part No: K2.72103.0
WCU-4 Wireless Compact Unit
The Wireless Compact Unit WCU-4 combines three axes of lens control with a lens data display in a compact and ergonomic housing.
66 330 SEK ORDER
Cable UMC-4 to Sony F65
Part No: K2.0002656
Cable UMC-4 to Sony F65
The ARRI Cable UMC-4 to Sony F65 connects Universal Motor Controller CAM connector to Sony F65. Provides camera RUN/STOP function. Length: 0.5m/1.6ft Separate UMC-4 RS IN cable for power supply required.
1 985 SEK ORDER
Cable SMC/EMC to RS
Part No: K2.0001606
Cable SMC/EMC to RS
The ARRI CABLE SMC/EMC to RS connects SMC-1 and EMC-1 motor controllers to ARRI RS connector. Provides camera RUN/STOP and tally function. Works with ALEXA and AMIRA cameras. Length: 0.5m
1 775 SEK ORDER
Cable LBUS 15m
Part No: K2.0006756
Cable LBUS 15m
ARRI and cmotion offer a wide range of cables for devices that use the LBUS communication protocol, such as the cforce mini and other cforce lens motors, the ALEXA Mini and the AMC-1.
2 090 SEK ORDER
Master Grip Right Wheel MRW-1
Part No: K2.0009494
Master Grip Right Wheel MRW-1
The Master Grips combine effective camera stabilization with comprehensive lens and camera control.
24 550 SEK ORDER
L-Bracket for UMC-4/SMC-1/EMC-1
Part No: K2.0001967
L-Bracket for UMC-4/SMC-1/EMC-1
The ARRI L-Bracket is a L-shaped bracket with 3/8" screws. Allows mounting UMC-4, SMC-1 and EMC-1 motor controllers to ARRI camera handles.
1 150 SEK ORDER
Part No: K2.0002042
UMC-4 connector module to Canon
The ARRI UMC-4 connector module to Canon is an optional connector module for Universal Motor Controller UMC-4.
3 550 SEK ORDER
Sign in

Your cart

(0)