These sites use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Your cart


CineMonitorHD 8" SBL RF

Part No: 917TS0077
Price (Excl VAT)
47 030 SEK
Product Description Specification

The CineMonitorHD RF features all tools of the CineMonitorHD Evolution plus the ability to receive a wireless signal from a TitanHD Tx.

It works on the 5.8GHz ISM band that doesn't require a broadcast license.

The CineMonitorHD RF carries RGB and YCrCb 10-bit signal (HD SDI and HDMI) as well as SD SDI and composite. It receives without any loss in a normal environment. With a latency below 5ms, it provides real-time SD/HD monitoring.

Equipped with the latest LED backlight technology the monitor outputs over 1000 Nits for full sun operation.

The monitor can be powered by battery (V-Mount or Anton Bauer) or by external DC.

Firmware and software updates are possible by the user with a USB key.

The selection of a channel can be manual or automatic. In P2P mode the link is possible only between one receiver and one transmitter. In Broadcast mode up to 6 receivers can be linked to a single transmitter, but data transmission from receiver to transmitter (S/N ratio, GPIO) is not possible.

Audio & Metadata Transmission
CineMonitorHD RF includes an audio jack connector for audio monitoring. SDI embedded Timecode and Tally transmission are possible in place of one audio channel (if any embedded in the SDI).

Monitoring Functions
Diplay settings include: Aspect Ratio (16/9 and Anamorphic, 4:3 in SD), Fixed markers (TV safe, 4:3 and 14/9), Zoom & Reframe, Image Flips & Monitor Reverse.
Mutliple color adjustments are available: Colorimetry (D56/D65/manual calibration), Curves (LogC, LogF, PanaLog) & Gamma Adjust, Color / Green / B&W display modes, Blue Check. 

Picture Analysis
High precision measurement tools include: Line Waveforms (Y, R, G, B), Parade Waveforms (RGB, GBR, YRGB, YPrPb), Frame Waveform with user-programmable clipping levels, Histogram *, Vectorscope, Exposure monitoring.

Standard tools include: Full color Frameline & Matting Generator, Timecode, Embedded Audio Monitoring, Voltage Control, as well as Tri-color Tally. 
Based on a high performance multi dimensional filter, the Focus Helper * helps to have a sharp focus in difficult situations. The i/ Lens module reads and displays in a friendly user interface the datas from Cooke S4/i & 5/i as well as Angénieux Zooms with ADS /i module. 
An optional virtual Horizon movable on the display can also be ordered (see Recommendations bellow).

What's included in the box

  • CineMonitorHD RF, with 2 shoulder strap pins and 1 bottom slide
  • Screen protective cover
  • Microfiber cloth and bag
  • USB adapter for SW updates
  • Printed documentation
  • In a Pelican case with custom shaped foam
Video inputs & outputs


1 x HD/SD SDI + 1 Rclk out (BNC)
1 x mini HDMI in
2 x HD/SD SDI RF out (BNC) 
Audio Monitoring out
1 x Jack 2.5 F
Wireless Modulation 5GHz ISM band COFDM MiMo
P2P: 1 Tx to 1 Rx
Broadcast: 1 Tx to 6 Rx
Channels 5 for Europe & Japan models, 10 for USA & Canada models
Contrast ratio
Viewing Angle
max 900:1
±80° H, +60°/-80° V
1000 Nits 
(l x h x d)  
215 x 276 x 106 mm
8.5 x 10.9 x 4.2 inches 
2080g, 4.6lbs
Power / 
Power Consumption 
XLR4 connector (-1, +4) - with galvanic insulation
11 - 36V DC / 28W
Sign in

Your cart