These sites use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Your cart


PAGlink Cube Charger (4 x V-Mount / iPC)

Part No: 9708
Price (Excl VAT)
6 685 SEK
Product Description Specification Downloads

The PAGlink Cube is a robust and compact location charger. It is an enhanced version of the PAG Cube charger.

The PAGlink Cube is designed for charging linked PAGlink batteries, from any state of charge, as well as non-linking V-Mount Li-Ion batteries. Up to 16 PAGlink batteries can be charged simultaneously (4 linked batteries per channel).

PAGlink means no more power concerns when using high-current camera set-ups, and no more midnight battery swapping on the charger.

At the end of a shoot, simply link your batteries and connect them to the charger. The next day, they will be fully charged and ready to go.

The charging process is managed automatically by the PAGlink batteries’ high-speed network and the Cube’s Intelligent Parallel Charging software.

During charging, the percentage state-of-charge of each PAGlink battery is indicated on its individual display. The most-discharged batteries are given a higher charge priority. Fully charged batteries will stop accepting charge automatically and independently.

The PAGlink Cube can also be used to charge simultaneously the latest non-linking PAG and Sony Li-Ion batteries, or to charge sequentially the previous generation of PAG Li-Ion batteries.

The stages of the charging process for each channel are clearly indicated on the unit’s large backlit LCD screen.

Using a PAG charger to charge and manage your PAG batteries is the best way to achieve the maximum number of cycles and the longest possible working life.

The PAGlink Cube is quiet and cool-running. It features a retractable handle to maintain its compact dimensions for transportation.

A recovery feature is included, to recover Li-Ion batteries if their cut-out has been tripped.

The high-power PAGlink Cube can be used to power your camera from any AC supply worldwide, with the addition of the PAG Camera Power Adaptor Model 9701V. The battery-sized Camera Power Adaptor can be connected to any channel on the charger and used to power any modern broadcast camera via its XLR4 output. The charger is capable of supplying 6A at 16.8V, which is approximately 100W.


  • 4-position simultaneous fast-charger

  • 4 x V-Mount connectors

  • Simultaneously charges up to 16 PAGlink batteries in any state of charge (4 per channel)

  • Simultaneously charges the latest PAG and Sony Li-Ion batteries (1 per channel)

  • Sequentially charges the previous generation of PAG Li-Ion batteries, PAG and Sony Ni-MH batteries (1 per channel)

  • Features PAG iPC - Intelligent Parallel Charging

  • High-powered 100W output (6A at 16.8V)

  • Fast-charges eight fully-discharged PAGlink batteries in 11 hours

  • Accepts firmware updates via battery connectors

  • Can be used as a camera power supply with the addition of the PAG CPA Model 9701V

  • 157 x 157 x 157mm / 1.19kg

Range of Batteries Charged:
Designed specifically for parallel charging the following PAGlink batteries, from any state of charge, individually or linked: 
Model 9303 PAGlink PL96e 
Model 9304 PAGlink PL96T

Suitable for parallel charging the following V-Mount Li-Ion batteries: 
Model 9310V PAG L95e and L96e
Model 9305V PAG L96T
Sony V-Mount Li-Ion

Suitable for sequentially charging the following V-Mount Li-Ion batteries: 
Model 9360 PAG L95
Model 9302V PAG L110 

Suitable for sequentially charging the following V-Mount Ni-MH batteries:
Model 9316V PAG ZL-150 
Model 9317V PAG ZL-125
Model 9315V PAG ZL-50
Sony V-Mount Ni-MH

Battery Connectors: 4 x V-Mount.

Main Charge Program: Li-Ion Intelligent Parallel Charging program. Maximum output 6A at 16.8V (100W approx.). 

PAGlink Charging:
The PAGlink system allows up to eight batteries to be linked in one stack for charging. However, PAG recommends that no more than four linked batteries are connected to each charging position of the PAGlink Cube, allowing up to 16 batteries to be charged simultaneously; this is to ensure that the charger’s V-Mount connectors are not mechanically overloaded. Batteries can be in any state of charge. The most-discharged batteries will be given a higher charge priority. Fully charged batteries stop accepting charge automatically and independently of other batteries.

Recovery Charge Program:
This special program will automatically recover a Li-Ion battery where the output has been shut down. Additionally, the program detects batteries having a very low voltage, and initiates a special low charge current. The program will operate until the voltage has risen sufficiently for batteries to safely accept the normal charge current.

Self Test Program:
The micro-processor constantly monitors the battery under charge or process as well as the operation of the charger’s own functions which will be shut down to a safe condition should any of the tests fail. 

Mains Input:
90V to 265V AC. Frequency 50-60 Hz. EN6100-3-2 Power factor corrected. Maximum consumption 140W. 

Output Protection:
The charger is protected against short circuit and excess battery voltage.

AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition.

User Interface:
The charge status of each PAGlink battery is indicated by its own display. 
The different stages of the charging process are indicated for each channel on the charger’s LCD screen. The charger is fully automatic in operation and no user controls are provided.

Designed to comply with electrical safety standard BS EN 60065 and UL6500. NOTE: U.K. mains leads are fitted with a 1" fuse to BS1362 rated 5A as standard.

European Union Directives:
Complies with the following EU Directives:
EMC Directive 89/336/EU.
Low Voltage Directive 73/23/EU.

Operating Temperature Range:0ºC to +40ºC (+32ºF to +104ºF).

Height: 157mm (6.2”).
Width: 157mm (6.2”).
Depth: 157mm (6.2”).

Weight: 1.19kg (2.6lbs).

Typical Battery Charging Times:
Charge times will vary depending on the condition and state-of-charge of the batteries. Typically, eight fully-discharged PAGlink batteries (2 linked on each charging position) will be fully-charged in approximately ten hours. These times are approximate only, and assume batteries are fully discharged. Charging times will be less if batteries are already partially charged.

Camera Power Supply:Requires PAG Camera Power Adaptor Model 9701V.

Sign in

Your cart