Your cart

(0)

Cables

LCD/EVF CABLE (RIGHT-TO-RIGHT)
Part No: 790-0158
LCD/EVF CABLE (RIGHT-TO-RIGHT)
The LCD/EVF CABLE (RIGHT-TO-RIGHT) is a braided cable with two 90 degree connectors that provides a clean, high-resolution video feed from an LCD/EVF port to your RED LCD or EVF display.
2 110 SEK ORDER
RED HD-SDI CABLE (6')
Part No: 790-0341
RED HD-SDI CABLE (6')
This high definition, 6’ HD-SDI cable is compatible with your EPIC, SCARLET, or PRO I/O MODULE and can carry an HD video feed to your HD-SDI production monitor or on-board display. Each cable is a braided, RED branded cable that delivers a high quality digital signal from end to end.
480 SEK ORDER
RED CAN COMMAND CABLE
Part No: 790-0408
RED CAN COMMAND CABLE
for hard-wired, reliable lens control communication.
5 040 SEK ORDER
DRIVE CABLE
Part No: 790-0050
DRIVE CABLE
The DRIVE CABLE allows you to connect your RED-DRIVE® or REDRAM® directly to your RED ONE®.
1 920 SEK ORDER
XLR MICROPHONE CABLE (20
Part No: 790-0229
XLR MICROPHONE CABLE (20")
With the XLR Microphone Cable (20"), you can turn your DSMC® BRAIN® 3.5mm audio input into a standard XLR connection for use with professional XLR microphones.
430 SEK ORDER
RED CAN COMMAND CABLE
Part No: 790-0407
RED CAN COMMAND CABLE
The RED CAN COMMAND CABLE connects your RED T.H.C. (TACTICAL HAND CONTROLLER) to your RED W.M.D. (WIRELESS MOTOR DRIVER) for hard-wired, reliable lens control communication.
2 830 SEK ORDER
XLR POWER CABLE
Part No: 790-0164
XLR POWER CABLE
Allows you to power your EPIC or SCARLET camera from a 4-Pin XLR power source.
1 730 SEK ORDER
MINI-XLR TO MINI-XLR CABLE
Part No: 790-0049
MINI-XLR TO MINI-XLR CABLE
The Mini-XLR To Mini-XLR Cable provides a male to female mini-XLR connection for third party camera accessories to be used along with the RED ONE. Use in conjunction with the Mini-XLR to XLR Adaptor with XLR based power accessories.
335 SEK ORDER
LCD/EVF CABLE (RIGHT-TO-STRAIGHT)
Part No: 790-0161
LCD/EVF CABLE (RIGHT-TO-STRAIGHT)
This LCD/EVF cable provides a universal high-resolution connection to any RED display.
2 590 SEK ORDER
DC POWER CABLE (10')
Part No: 790-0060
DC POWER CABLE (10')
The RED ONE® DC Power Cable (10’) provides a high-quality cable for powering your RED ONE from a REDBRICK Charger.
1 440 SEK ORDER
LCD/EVF CABLE (RIGHT-TO-RIGHT)
Part No: 790-0449
LCD/EVF CABLE (RIGHT-TO-RIGHT)
The LCD/EVF CABLE (RIGHT-TO-RIGHT) is a braided cable with two 90 degree connectors that provides a clean, high-resolution video feed from an LCD/EVF port to your RED LCD or EVF display.
2 495 SEK ORDER
4-PIN TO 2-PIN ADAPTOR CABLE
Part No: 790-0334
4-PIN TO 2-PIN ADAPTOR CABLE
The 4-PIN TO 2-PIN ADAPTOR CABLE converts 4-pin power into a 2-pin female lemo connection, allowing you to power your 2-pin based accessories from your +1 ADAPTOR MODULE or PRO I/O MODULE.
1 200 SEK ORDER
MINI-XLR ADAPTOR
Part No: 790-0065
MINI-XLR ADAPTOR
Adaptor used to convert from mini-XLR to standard XLR, allowing you to use standard XLR audio equipment with your RED ONE. To be used with MINI-XLR to MINI-XLR CABLE
180 SEK ORDER
LEMO-TO-CAT5E ETHERNET CABLE (9')
Part No: 790-0159
LEMO-TO-CAT5E ETHERNET CABLE (9')
The RED® GIG-E Straight-to-CAT5E Ethernet Cable (9’) is a high quality braided cable that allows you to connect your DSMC or DSMC2 camera to a computer via the GIG-E port on the camera BRAIN or expander.
1 150 SEK ORDER
RED USB-TO-MINI USB CABLE
Part No: 790-0230
RED USB-TO-MINI USB CABLE
The RED USB-TO-MINI USB CABLE enables you to connect your RED STATION 1.8" or 2.5" SSD reader to your computer or external hard drive using a USB 2.0 connection. This item will also charge your REDmote device when plugged into an powered source (6’ length only). NOTE: The RED USB-TO-MINI USB cable (24") does not provide sufficient power to charge the REDmote. You must use the 6’ cable for charging this device.
145 SEK ORDER
LCD/EVF CABLE (RIGHT-TO-STRAIGHT)
Part No: 790-0451
LCD/EVF CABLE (RIGHT-TO-STRAIGHT)
This LCD/EVF cable provides a universal high-resolution connection to any RED display.
2 400 SEK ORDER
XLR POWER CABLE
Part No: 790-0165
XLR POWER CABLE
Allows you to power your EPIC or SCARLET camera from a 4-Pin XLR power source.
1 150 SEK ORDER
RED USB-TO-MINI USB CABLE
Part No: 790-0315
RED USB-TO-MINI USB CABLE
The RED USB-TO-MINI USB CABLE enables you to connect your RED STATION 1.8" or 2.5" SSD reader to your computer or external hard drive using a USB 2.0 connection. This item will also charge your REDmote device when plugged into an powered source (6’ length only)
96 SEK ORDER
LCD/EVF CABLE (18'')
Part No: 790-0151
LCD/EVF CABLE (18'')
The LCD/EVF CABLE (18") is a braided cable that provides a clean video feed from an LCD/EVF port to your RED LCD or EVF display.
2 305 SEK ORDER
RED TIMECODE CABLE
Part No: 790-0058
RED TIMECODE CABLE
RED TIMECODE CABLE connects via lemo from your timecode source directly to your RED ONE.
960 SEK ORDER
RED GIG-E RIGHT TO CAT5E ETHERNET CABLE (9IN)
Part No: 790-0557
RED GIG-E RIGHT TO CAT5E ETHERNET CABLE (9IN)
The RED® GIG-E Right-To-Cat5E Ethernet Cable (9’)
1 150 SEK ORDER
RED STATION USB-TO-DC POWER CABLE
Part No: 790-0316
RED STATION USB-TO-DC POWER CABLE
The RED STATION® USB-TO-DC POWER CABLE allows you to power your RED STATION 1.8", 2.5" or CF by using the power from a local USB 2.0 port.
96 SEK ORDER
LCD/EVF CABLE (RIGHT-TO-STRAIGHT)
Part No: 790-0153
LCD/EVF CABLE (RIGHT-TO-STRAIGHT)
This LCD/EVF cable provides a universal high-resolution connection to any RED display. Right angle-to-straight configuration Braided cable Length measured from end-to-end of cable including connectors
2 305 SEK ORDER
3BNC-TO-00 SYNC CABLE
Part No: 790-0154
3BNC-TO-00 SYNC CABLE
Provides timecode / genlock / trigger in functionality via camera SYNC port.
960 SEK ORDER
RED CAN COMMAND CABLE (100ft)
Part No: 790-0409
RED CAN COMMAND CABLE (100ft)
The RED CAN COMMAND CABLE connects your RED T.H.C. (TACTICAL HAND CONTROLLER) to your RED W.M.D. (WIRELESS MOTOR DRIVER) for hard-wired, reliable lens control communication.
7 535 SEK ORDER
LCD/EVF CABLE (RIGHT-TO-RIGHT)
Part No: 790-0448
LCD/EVF CABLE (RIGHT-TO-RIGHT)
The LCD/EVF CABLE (RIGHT-TO-RIGHT) is a braided cable with two 90 degree connectors that provides a clean, high-resolution video feed from an LCD/EVF port to your RED LCD or EVF display.
2 305 SEK ORDER
RED TIMECODE CABLE
Part No: 790-0059
RED TIMECODE CABLE
RED TIMECODE CABLE connects via lemo from your timecode source directly to your RED ONE.
720 SEK ORDER
RED 4-PIN 0B LEMO TO FLYING HEAD AUX POWER
Part No: 790-0552
RED 4-PIN 0B LEMO TO FLYING HEAD AUX POWER
customizable and braided cable for various power needs.
910 SEK ORDER
LCD/EVF CABLE (RIGHT-TO-RIGHT)
Part No: 790-0162
LCD/EVF CABLE (RIGHT-TO-RIGHT)
The LCD/EVF CABLE (RIGHT-TO-RIGHT) is a braided cable with two 90 degree connectors that provides a clean, high-resolution video feed from an LCD/EVF port to your RED LCD or EVF display.
2 210 SEK ORDER
4-PIN 00 LEMO-TO-FLYING LEAD
Part No: 790-0187
4-PIN 00 LEMO-TO-FLYING LEAD
The 4-PIN 00 LEMO-TO-FLYING LEAD is a customizable, braided cable for advanced users; designed for customizable connections for interacting with SYNC and CTRL ports of their EPIC or SCARLET camera.
575 SEK ORDER
RED 7-PIN LEMO 0B TO FLYING HEAD AUX POWER
Part No: 790-0553
RED 7-PIN LEMO 0B TO FLYING HEAD AUX POWER
customizable and braided cable for applications with unique serial communication needs.
1 870 SEK ORDER
Sign in

Your cart

(0)