The ARRI KC-20 connects the 24 V BAT (2 pin Fischer) power input on the ARRICAM, ARRIFLEX, ALEXA or ALEXA XT cameras to a battery power output with an XLR 3 pin connector.

SDI 3G Signal isolator to avoid damage to SDI outputs on cameras.

The ARRI KC-29 connects the 24 V BAT (2 pin Fischer) power input on the ARRICAM, ARRIFLEX, ALEXA or ALEXA XT cameras to a battery power output with an XLR 3 pin connector.

The Kc 154-SP-S is a spiral cable that connects the 12V socket on the ALEXA and ALEXA XT family of cameras (Lemo 2 pin) to any accessory with an XLR 4 pin socket.

The ARRI CABLE SMC/EMC to RS connects SMC-1 and EMC-1 motor controllers to ARRI RS connector. Provides camera RUN/STOP and tally function. Works with ALEXA and AMIRA cameras. Length: 0.5m

The ARRI ALEXA to Cine Tape Measure cable connects Cine Tape Measure to ALEXA EXT connector. Length: 1,50 m/5 ft.

The ARRI KC 153-S connects the ETHERNET socket (Lemo 10 pin) on the ALEXA and ALEXA XT family of cameras to any standard RJ-45 Ethernet socket for updates, other service purposes or to remotely control the camera from a computer via the built-in web server.

The ARRI CAB-1 Cable is required for cmotion ENG adapters.

The ARRI KC 156-S connects the Ethernet socket (Lemo 10 pin) on the ALEXA or ALEXA XT family of cameras to the EXT socket on another ALEXA and ALEXA XT camera in order to synchronize the settings of one camera to another for 3D and other applications.

The ARRI KC 158-S cable connects the Ethernet socket of the ALEXA and ALEXA XT family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin).

The ARRI KC-159-S cable extends the Ethernet Remote Cable KC 157 (K2.72040.0) or Ethernet Remote Cable KC 158 (K2.72041.0)

The ARRI KC 155-S connects the EXT socket (Fischer 16 pin) on the ALEXA or ALEXA XT family of cameras to the EXT socket on another ALEXA and ALEXA XT camera in order to synchronize sensor readout and HD output clocks for 3D and other applications where precise synchronization of two cameras is needed.

The ARRI ALEXA 3D Cable Set contains one ALEXA EXT to EXT Cable (K2.72032.0) for sensor and HD outputs sync and one ALEXA Ethernet to Ethernet Cable (K2.72033.0) for camera settings sync.

The ARRI ENG adapter Canon (cmotion) cable connects the ARRI lens control system with Canon servo demands for remote focus and zoom control.

The ARRI ENG Adapter Fujinon (cmotion) cable connects the ARRI lens control system with Fujinon servo demands for remote focus and zoom control.

The ARRI SMPTE Steadycam Cable for the ALEXA M is an extremely thin and flexible hybrid fiber/copper (signal and power) cable that connects ALEXA M or ALEXA XT M head and body for steadicam use.

The ARRI SMPTE Hybrid fiber/copper (signal and power) cable that connects ALEXA M or ALEXA XT M head and body.