Continuous Power Module (12V to 14.4V / 7.2V outpu

The PAGlok Power Module is a compact, lightweight unit designed to supply continuous power from two PAGlok batteries for editing equipment, remote cameras or microwave links.

PAGlok batteries of any cell-chemistry, capacity and state-of-charge can be used.

Output is via an XLR4 socket. 

A third power source, such as a Pagbelt can be connected via the XLR4 input socket. 

Two Power Modules can be linked to provide seamless power from up to five power sources using Power Module Connecting lead Model 9664. 
This model features an integral DC/DC converter that provides a regulated 7.2V output. 

A carrying strap for the Power Module is provided.

A V-Mount Model 9663V is also available for use with V-Mount batteries.

• Designed for equipment that requires a continuous, uninterrupted supply of battery power


• Utilises your existing battery stocks


• At no time are any two batteries electrically connected


• Range: 12V to 14.4V PAGlok batteries


• Max. voltage: 20V


• Max. continuous current: 12A


• Output protected against short circuit and over-current


• Features additional 7.2V DC output, max. continuous current 1.5A


• 135 x 115 x 55mm / 0.41kg

Power Input Connectors: 2 x PAGlok.

Suitable Battery Voltage: Nominal 13.2V to 14.8V (12V batteries may be used, but will be discharged by only 50% to 60%). 

Battery Type: Nickel-Cadmium, Nickel-Metal Hydride or Lithium-Ion. 

Maximum Voltage: 20V.

Output Rating: 
XLR4 Output: Maximum continuous current 12A. The output is protected against short circuit and over-current.
7.2V Output: Maximum continuous current 1.5A. The output is protected against short circuit and over-current.

Remote Input: XLR4 male: Pin 1 negative, Pin 4 positive, Pins 2 & 3 sense.

XLR4 Output: XLR4 female: Pin 1 negative, Pin 4 positive, Pins 2 & 3 sense.

7.2V Output: Pin 1: positive, Pin 2: no connection, Pin 3: negative.

User Interface: The unit is provided with a power switch which enables the output power to be turned on or off. Battery status is shown by LED indicators. 

Changeover Voltage: The unit will switch the output instantaneously from a nominally discharged battery to a nominally charged battery when the voltage on the discharged battery reaches 11.71V (2%). At no time are any two batteries connected together.

Safety: The Power Module is designed to be operated at Safety Extra Low voltage.

European Union Directives:Complies with EMC Directive 89/336/EU. The Power Module falls outside the scope of the EU Low Voltage Directive. 

Operating Temperature Range: 0ºC to +40ºC (+32ºF to +104ºF).

Dimensions:
Height: 135mm (5.3”).
Width: 115mm (4.5”).>br/> Depth: 55mm (2.1”).

Weight: 410g (0.9lbs).